bing tracking image

Best 2014 Chevrolet Tahoe Bike Racks

change vehicle


Bike Rack Videos

Thule Vertex 4 Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe we're going to be test fitting the Thule Vertex, a folding and tilting 4 bike rack for inch and a quarter and two inch hitches, part number TH9029. To begin our test fit we're going to slide the shank of the bike rack into the receiver tube of our hitch. We'll then line up our pinholes, thread through our anti-rattle bolt, and tighten it down with a wrench. In this position we'll have about twenty-two inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about four inches away. Overall, we've added about twelve inches to the length of the Tahoe.



Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, we are going to be test fitting the Hollywood Racks Traveler Tow N Go 3 Bike Rack for 2 inch ball mounts part number HR135. We've mounted our Traveler to a hidden hitch, extra long shank ball mount part number 80232, this is sold separately. To begin our test fit, we're going to slide the shank of the ball mount into the receiver tube of our hitch, line up our pin holes, slide through our pin and secure it with the clip. At the top of the mast pulling the black pin will allow us to swing our cradle arms out into the loading position. We'll reinsert the pin to hold this in place. With our cradle arms extended it's about 21 3/4 of an inch from the very front of the rack to the rear of our cradle arms.



Yakima StickUp 2 Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, were going to be test fitting the Yakima Stickup, a folding 2 bike rack for 1 and 2 inch hitches part number YO2420. To begin our test fit well slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread through anti-rattle bolt and tighten it down with a wrench. Well then secure it using the provided lock. In this position we have about 22 inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about 5 1/2 inches away and overall weve added about 9 inches to the length of the vehicle. Pulling the red knob at the base of rack will allow us to tilt it away from our vehicle into the platform position. As you can see this gives us full access into our hatch.



Thule Hitching Post Pro Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, were going to be test fitting the Thule Hitching Post Pro, a folding and tilting 4 bike rack for 1 and 2 inch hitches part number TH934XTR. To begin our test fit were going to slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 21 inch worth of ground clearance. The closest point of the rack to the back of our vehicle is about 7 of an inch away and overall weve added about 17 inches to the length of our Tahoe. Pulling the gold pin and clip located at the base of the center mast allows us to tilt it away from our vehicle. As you can see this gives us full access into our hatch. With our mast back in its upright position and the pin reinserted, well now pull the pin at the top of the mast.



Thule Helium Aero Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe we're going to be test fitting the Thule Helium Aero, a tilting 2 Bike Rack for 1-1/4" and 2" hitches, part number TH9042. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of our hitch. As we do this we'll hold down on the black attached pin. We'll line up our pin holes, place the attached pin into the pin holes and then we'll tighten up the black knob. This will engage our anti-rattle device further securing the rack to our vehicle. In this position we have about 22-3/4" worth of ground clearance. The closest point of the rack to the back of our vehicle is about 2" away.



SportRack Super EZ Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, were going to be test fitting the Sport Rack Super EZ platform style 2 bike rack for 1 and 2 inch hitches part number SR2901LR. To begin our test fit were going to slide the slide of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it using the provided lock. In this position we have about 24 inch worth of ground clearance. The closest point of the rack to the back of our vehicle is about 7 inches away and overall weve added about 24 inches to the length of our Tahoe. Pulling the 2 black pins located on the rear of the rack on the outside will allow us to tilt our wheel cradles down into position. Well reinsert the pins in the new holes to secure them in place.



SportRack 3 Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe we're going to be test fitting the SportRack Tilting 3 Bike Rack for 1-1/4" and 2" hitches, part number SR2403. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of our hitch. We'll thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it with the provided lock. In this position we'll have about 22" worth of ground clearance. The closet point of the rack to the back of our vehicle is about 5" away. Overall we've added about 12" to the length of our Tahoe. Pulling the black pin and clip at the base of the mast will allow us to tilt it away from our vehicle.



Softride Dura Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, were going to be the test fitting the Soft Ride Dura Parallelogram, a tilting 4 bike rack for 1 and 2 inch hitches part number SR26247. To begin our test fit well slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread on our anti-rattle bolt and tighten it down with a wrench. Well then secure it using the provided lock. In this position we have about 22 inches worth of ground clearance. The closest point of the rack to the back of the vehicle is about 7 inches away and overall weve about 37 inches to the length of our Tahoe.A great feature of the Dura parallelogram are the removable cradle arms. To remove them, well simply push over on the 2 small black tabs located at the end of the arm and slide them out.



Softride Element Hitch Mounted Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, we're going to be test fitting the Softride Element Parallelogram. This is the tilting 4-bike style rack designed for use with 1-1/4 or 2 inch hitches, part number SR26248. Now to begin our test fit, we're going to the slide the shank of the bike rack right into the receiver tube of our hitch. We'll get two threaded holes to choose from. We're going to line that one up with the pin hole and hitch here. We can then take our anti-rattle bolt and thread that in. We'll then tighten it down with a wrench.



Pro Series Q-Slot Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe. We'll be doing a test fit of the Pro Series Q-Slot Platform Style Hitch Mounted 2 Bike Rack, part number PS63134. We'll begin our test fit by sliding the shank of the rack into the opening of the hitch. We'll then need to line up the pinholes in our rack with the pinhole in our hitch and we'll slide our standard 5/8ths hitch-pin into the pin holes and then secure it with the clip. With the bike rack secure, I'll go over a couple clearance measurements for you, for ground clearance we have about 24 1/2 inches, the closest part of the rack to the closest part of the vehicle is probably going to right here at this rise, about 6 inches away, and then overall we've added about 25 1/4 inches to the overall length of our Tahoe. Now I'll go ahead and show you how to lower the platform down. There are three silver pins here at the base, undo two of these to lower the platform. Just pull out the pin, kind of wiggle it a little bit, and then reinsert it.



Saris Porter 4 Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe and we'll be doing a test fit of the Saris Bike Porter Hitch Mounted Hanging 4-Bike Rack, part number SA404B. We'll start off our test fit by sliding the shank of the rack into the opening of the hitch. We'll then need to line up the pinhole on our bike rack here with the pinhole in our hitch. You'll need to thread the anti-rattle bolt from the driver's side. We'll line up the holes, thread in our anti-rattle bolt, and we'll tighten it down using a wrench. Give it a good shake.



Rhino-Rack 4 Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Here we have a 2014 Chevy Tahoe, and we'll be doing a test fit of the Rhino Rack hitch mounted hanging 4 bike rack, part # RBC038. We'll begin our test fit by sliding the shank of the rack into the opening of the hitch. What we'll need to do is line up the hole in our bike rack with the hole in the shank. Now you can see that there are 2 settings here just to give you a couple of options depending on your vehicle configuration but since there's a lot of space here. I'm going to put it on the closest one just to give us some more strength and durability. Oops, you're going to need to go from the right hand side, passenger's side, which is where the threads are. Then use a wrench, tighten it down.



Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe, and we'll be test fitting the Hollywood Racks Traveler Hitch-mounted Hanging 5 Bike Rack, part number HR9200. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll need to line up the pinhole in the shank of our rack with the pinhole in our hitch. Once we do that, we'll thread in our anti-rattle bolt. The anti-rattle bolt is just going to help prevent any wiggle or wobble within the hitch. Once we get that finger tight, we'll then tighten it down using a wrench, give it a good shake, and then we'll secure it with a clip on the other side. With the bike rack secure, we'll go ahead and give you a couple of clearance measurements. For ground clearance, we have about 22-1/4 inches. Closest part of the rack to the closest part of the vehicle is going to be about this angled piece right here.



Swagman Titan Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe. We'll be doing a quick test fit of the Swagman Titan Hitch-Mounted 4-Bike Rack, part number S63410. We'll begin our test fit by sliding the shank of the rack into the opening of the hitch. We'll then need to line up the pinhole and our rack here with the pinhole in our hitch. Once that's done, once we have the pinholes lined up, we'll thread in the anti-rattle bolts, then we can tighten it down using a wrench. Got everything all nice and snug, then we can go ahead and secure it with a clip on the other side, and then we'll go over a couple clearance measurements for you. Alrighty, ground clearance we have about 25 and 1/4 inches. Closest part of the rack to the closest part of the vehicle looks to be right at where the shank starts to rise up, about 5 inches away.



Swagman Jackknife Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe, we'll be doing a test fit of the Swagman Jackknife, hitch mounted 2 bike rack, part # S63450. We'll begin our test fit by sliding the shank of the rack into the opening of the hitch. Then we'll need to line up the pin holes in our rack with the pin holes in our hitch. Today I'm going to be using the anti-rattle bolt that secures with a clip on the other side. If you we're using the anti-rattle bolt that comes with the lock, you need to insert it from the passenger's side just to make sure it doesn't in contact with the7 way, but Line up the holes, thread in the bolt. I can secure it with a wrench.



Softride Hang2 Tilting Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, we are going to be test fitting the Softride Hang2. This is a hanging 2 bike rack designed for use in 2 inch hitches, part number SR27041. To begin our test fit, we will slide the shank of the rack into the receiver tube of our hitch. As we do, we want to line up the pin holes. There we are. We will then thread in our anti-rattle bolt and tighten it down with a wrench. We will then use the supplied lock to secure it. In this position, we are going to have about 22 inches worth of ground clearance.



Swagman XTC4 Wheel Mount Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Today we have a 2014 Chevy Tahoe and we'll be doing a quick test-fit of the Swagman XTC4 hitch-mounted platform-style four-bike rack part number S64665. We'll begin our test-fit but sliding the shank of the bike rack into the opening of the hitch. We'll then need to line up the pinholes in our shank with the pinholes in our hitch. The bike rack is kind of heavy so maybe it will be difficult just to get the pinholes lined up. We'll take our antiradar bolt and because the 7-way here is on our vehicle we'll need to insert the bolt from the passenger side. We'll thread-in the antiradar bolt good finger-tight and then we'll tighten it down using a wrench.



Saris Thelma 3 Bike Rack Review - 2014 Chevrolet Tahoe

Today, on our 2014 Chevrolet Tahoe, we're going to be test fitting the Saris Thelma. This is a platform-style 3-bike rack designed for use with 1-1/4 inch or 2-inch hitches, part number SA4239B. To begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch, and we'll look through the hole there to see where we have the holes lined up. Then take our pin, slide it through from the left to the right, and then we'll thread that on in. We'll take our wrench. We'll tighten that down, and we'll secure it with the provided clip here on the other side. Now, the rack's going to offer us about 22-1/2 inches worth of ground clearance.



Saris Freedom Hitch Bike Racks Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, we're going to be test fitting the Saris Freedom. This is the platform style, tilting four bike rack, designed for use with two inch hitches. Part number SA4414B.Speaker 2: To being our test fit, we're going to slide the shank of our rack into the receiver tube of our hitch. As we do it, we'll want to look through the hole there to see when we have our holes lined up. With those lined up, we'll take our anti-rattle bolt, thread it in from the left to the right, then use our wrench to tighten that down. We'll then take our provided clip and secure it. Now, the rack's going to offer us about twenty one and a quarter inches worth of ground clearance.



Saris Axis 3 Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe we are going to be test fitting the Saris Axis. A tilting and folding three bike rack design for use in inch and a quarter and two inch hitches part number SA843B. We'll begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch. As we do, we want to keep an eye through the pinhole to see when that one lines up with it. With our holes lined up, we are going to thread in our anti rattle bolt. We are going to do this from the left to the right side. We are going to tighten it down with our wrench.



Hollywood Racks Traveler Hitch Bike Rack Review - 2014 Chevrolet Tahoe

Speaker: Today we have a 2014 Chevy Tahoe and will be test fitting the Hollywood Racks Traveler Hitch Mounted Hanging 4 Bike Rack, part number HR8500. Well start off our test fit by sliding the shank of the rack into the opening of the hitch. Well then need to line up the pin hole on our bike rack here with the pin hole on our hitch. Slide it in, then well thread in our anti-rattle bolt and well tighten it down using a wrench and once everything is all nice and snug, well then secure it with a clip here on the other side. With the bike rack secured, well now go over just a couple clearance measurements. From the back of the bike rack, we have about 22 inches of ground clearance. Closest part of the rack which is about this angle piece here to the rear bumper is about 3 inches away and then overall, weve added about 10-1/4 inches to the overall length of our Tahoe. Now what well need to do is remove this black pin here at the top of the mast, pop that off, pull the pin out.



Yakima FullTilt 4 Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe, we're going to be test-fitting the Yakima FullTilt. This is a folding and tilting 4-bike rack, designed for use in 1 1/4" or 2" hitches. Its part number is Y02462. We'll begin our test-fit by sliding the shank of our rack into the receiver tube of our hitch. As we do it, we'll want to watch the pinhole here on the side to see when our pin there gets lined up. With our pin lined up in our pinhole, we'll now come here to the rear of the rack and we'll turn the red, triangle -haped knob.



Saris Axis Tilting 2 Bike Rack Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe were going to be test fitting the Saris Axis, a folding and tilting 2 bike rack designed for use 1 inch and 2 inch hitches part number SA832. To begin our test fit, were going to slide the shank of the rank directly under the receiver tube of our hitch. As we slide it in were going to line up our threaded pin hole with the pin hole in our receiver tube. Once we have those lined up, were going to take the supplied bolt and were going to thread this in from the left hand side to the right. With that threaded in, were going to tighten it down with our wrench. This helps to take any of the play out of the rack.





2014 Chevrolet Tahoe Bike Rack Questions