Most Popular No Ball for 2011 Ford Escape

Perfect fit and easy to install.

Overall, I am extremely satisfied with the products I bought. Your communications are excellent; shipping was performed in an expedient manner and the tracking of the packages was much appreciated. I'm not sure I'll be buying anything else from you (I can't imagine needing another tow bar again) but will surely recommend your company if asked.

Great product for a great price. Bought my hitch receiver and then realized I didn't need to order this ball mount elsewhere because of the competitive pricing at etrailer. Pro tip for trailer newbies like myself: Grease the ball to avoid squeaking and lengthen its life.

A solid piece of towing ability.

I bought this drawbar for towing a 2000 lb GVWR utility trailer behind my 2011 Escape with a factory Class II receiver. It gives me the drop I need to have the trailer ride level. Not an easy find in local stores. A very solid piece with full welds all around. I'm very confident it'll last my lifetime.

The draw bar is absolutely perfect! all other internet and local hitch installer contacts said no one makes a 1 1/4" draw bar with a 6" drop. first picture is my original draw bar with a 2.5" drop. the trailer was running quite high. number 2,3,4 are with your Brophy draw bar you can really see the trailer is level.I took a measurement that may come in handy in your files. my car is a 2012 ford escape with a factory trailer package . The measurement from the center of my receiver to the ground is 18"1/4" trailer tires are 5.30x12 This is my new car and I was surprised at the height. the Ford dealer was no help so possibly you can supply other 4 wheel drive escapes with draw bars.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great product

With a receiver hitch already installed on a ford escape all my receivers are 2 inch but the one on the escape is 1 1/2 inch so I had a problem that etrailer had a solution for , the proper sized hitch that works great .

Looked everywhere for the right hitch tô fit my Ford Escape. Finally found it here. It fits perfect and delivery was fast. Will definitely be ordering from you again. Thank you.

With a receiver hitch already installed on a ford escape all my receivers are 2 inch but the one on the escape is 1 1/2 inch so I had a problem that etrailer had a solution for , the proper sized hitch that works great .

Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.

was not the right height for my aplication, but the mount itself is good

Perfect fit and easy to install.

Nice items...all carefully packaged and individually separated for shipping...much appreciate the extra effort!!!!!

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.

Top quality Drawbar, great service.

Great services.

Perfect fit for a factory-installed classI II hitch on a 2010 Ford Escape.

no problem with this part.

With a receiver hitch already installed on a ford escape all my receivers are 2 inch but the one on the escape is 1 1/2 inch so I had a problem that etrailer had a solution for , the proper sized hitch that works great .

ditto

Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

Click to Enlarge

Click to Enlarge

Click to Enlarge

Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.

This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.

Heavy duty , very good quality.

Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.

Perfect fit for a factory-installed classI II hitch on a 2010 Ford Escape.

Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.

Perfect fit for a factory-installed classI II hitch on a 2010 Ford Escape.

Great product for a great price. Bought my hitch receiver and then realized I didn't need to order this ball mount elsewhere because of the competitive pricing at etrailer. Pro tip for trailer newbies like myself: Grease the ball to avoid squeaking and lengthen its life.

A solid piece of towing ability.

Great product for a great price. Bought my hitch receiver and then realized I didn't need to order this ball mount elsewhere because of the competitive pricing at etrailer. Pro tip for trailer newbies like myself: Grease the ball to avoid squeaking and lengthen its life.

A solid piece of towing ability.

Great product for a great price. Bought my hitch receiver and then realized I didn't need to order this ball mount elsewhere because of the competitive pricing at etrailer. Pro tip for trailer newbies like myself: Grease the ball to avoid squeaking and lengthen its life.

A solid piece of towing ability.