# 1
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 2
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
Fast shipping and great service
This hitch fits my Explorer great. My camping trailer & utility trailer now pull level. I only wish the hitch reached a little further into the receiver. It seems a little short to me.
# 3
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Fits as expected looking forward to towing pontoon boat this summer.
It looks like it will work OK. It fits and appears to be the right height for my utility trailer, but I did not get a pin to hold the unit into my receiver - just the product. The picture showed a pin and a clasp was included.
# 4
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
Awsome ball mount that allows me to open the hatch on my explorer while towing my boat.
# 5
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Worked perfectly with my standard Ford Explorer hitch 2003. Service at etrailer was great, and hitch arrived in timely manner.
perfect for my needs - great price; great service
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 7
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
Great deal on the Curt Class III ball mount with 2" ball. etrailer.com was great to work with. Ordered Sunday and delivered Wednesday. I'll definitely use etrailer.com again!
# 8
Curt Pintle Hook with 2" Ball - for 2" Hitches - 10,000 lbs/16,000 lbs
This is an excellent hook. And it looks killer. etrailers exceptional service and quality is beyond compare.
Looks great
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
Great product. Just as I needed. Very prompt delivery
Fast and efficient
# 10
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
As advertised at a good price. I need the drop down for my Ford Explorer, as the hitch receptacle on the bumper is too high for my trailer to be level without the drop. Works well.............
# 11
Flash Self-Locking, Aluminum Ball Mount - 6" Drop, 5" Rise - 10,000 lbs
Excellent hitch. I like that it is made from one piece of solid aluminum and so much easier to lock and unlock. No more fumbling around under the bumper trying to unlock the hitch pin.
Just what I'd hoped for. Extremely light-weight and easy to install/remove. Perfect mount for my new Jeep Cherokee!
# 12
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The 2" receiver hitch fit perfect on my 2004 Ford Explorer XLT. I could not be more pleased with the product and most of all the professional and polite manner that etrailer handled the sale. Plus etrailer is the most affordable site I could find. I received the hitch in only two days...WOW. I will recommend you to everybody. Thank you. Freddie
Nice looking ball mount. Coating looks nice and it seems to be a solid piece.
# 13
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
Received order the next day. Haven’t used item yet so no performance review available.
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Very good product and great service, Thanks Rick
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Very good product and great service, Thanks Rick
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
# 16
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 17
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Product arrived ahead of schedule due to upgraded shipping at no extra cost. Order was accurate and appears to be high-quality. Obviously, I won't know for sure until I take it out with a trailer a few times, but I am glad to find a product that can tow my car and carry my bike rack at the same time!
They give you the exact fit as described. And fast delivery
# 18
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
I needed a 6 inch drop ball mount for my new utility trailer. I knew that Etrailer would have a quality product to fit this. Curt is a great product.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 19
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Like the other items I ordered this arrived 2 days early and fit perfectly and is exactly what I needed for my 98 Explorer for towing a car trailer.....
Didn't realize that the unit came with a pin and clip so I ordered one. Now I have 2. No problem. Good product and it was delivered 2 days earlier than anticipated!
# 20
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Product came just as described and fit perfectly for what I needed. I used it for a hitch mounted on the frame of the rear of my fifth wheel rv. Hitch was mounted at the very end of the I-beam style frame i had on rv but I wasn't comfortable with the length of a standard size ball mount receiver. It needed to be longer. This product was exactly what I needed to complete my rv hitch setup. Thanks e-trailer !
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
What our customers are saying:
"Nice shopping experience. Good selection and prompt shipment. After I see the products in person, I am sure that I will be back for more. Best, Jim"