Best 2008 Chevrolet Suburban Trailer Hitch Ball Mounts

Solid construction, real heavy duty

I purchased the AMSC10 because I needed a 10" drop hitch to tow my lowboy enclosed trailer with my lifted Toyota Tundra. I tried several other types of hitches with this towing combo and I was always disappointed. Mostly because of the fit/sloppiness of the ball mount into the receiver. This would cause a lot of noise and the feeling of the trailer "bucking" while hitting bumps and such. The other hitches that I tried were those cool aluminum ones, both a fixed one and an adjustable one. Although they were pretty, both left me very disappointed. The shipping for this hitch from Etrailer was fast and efficient. I received emails informing me of my order status throughout the whole process. Upon receiving my AMSC10, I tested it out and found it to be a much nicer fit into the receiver. Once I hooked up to the trailer and began to tow, the difference was extremely noticeable. This hitch is quiet, it doesn't buck, and in fact, comparatively, you wouldn't even know the trailer was behind you unless you looked. I am actually really excited about towing with this hitch. I know it sounds goofy, because it is, but it makes the task so much more pleasurable with the cushion ball mount. I'm already thinking about buying the 8" drop for my normal trailers.

Its a ball mount. As far as ball mounts go, this one's pretty spiffy.

Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.

I'll start off with the great customer service, called a rep for assistance and did a great job. He walked me through everything for about 5 minutes. Then I proceeded to order parts at a very reasonable price. Shipping was right on time and tracking was top notch. Now for the parts I received. Trailer hitch receiver was built like a tank, and very easy to install. I didn't even have to take off the whole bumper which I see on your website. There is only one problem with this hitch receiver. Zip ties to hold the facia bracket? It's like putting a $10 paint job on a Rolls Royce. I'm sure you have a good R&D department, but this is unacceptable. I could tell you how to make this better but I'm not part of your team. Could be solved by putting a ___ on the ______. R&D should be smart enough and paid well to figure this out. No offense but they can do better. ??ZIP TIES?? Also, it is pitched with a cap but did not receive that. I also purchased A brake controller P3 and a ball hitch. The ball hitch is pictured wrong on your website. It's pictured with an adjustable ball hitch. This is what really wanted but got something entirely different. If it works, I'll be fine with it. I should have caught that, but my eyes adjusted on the adjustable ball hitch. P3 brake controller was very easy to install, about 5 minutes. On a closing note, I will order from etrailer again. Thanks for your business. Just please listen to your customers and fix these problems. Everything and everybody are not perfect. Thanks again.

The hitch assembly included everything needed for quick and complete installation. Perfect fit for my 2023 Honda Passport. Have been using etrailer for some years now and have never had a bad experience. The self-help videos are a plus for customer service. Good work guys!

I purchased a 2020 GMC Yukon XL Denali which is about 9" taller than my 1988 Chevy Suburban was. The Convert-A-Ball Mount with a 12" Drop is the right amount of drop I needed so I could keep all 3 of my trailers (box, boat, and car trailers) level with the ground. The Convert-A-Ball Mount with a 12" Drop and a 7,000 lb load rating has been a very good product for me.

I recently bought a new Chevy Suburban. I've been driving these since before they were called SUV's. Back when they were the only game in town. And I've been towing trailers all this time. But my new Suburban has a hitch receiver that is in the middle of the bumper, much too high. One of my trailers actually scrapes along the ground because of the height of the hitch. I got a 6" drop hitch elsewhere, but was dissappointed that it didn't solve my problem. And 6" drop was the lowest they had. I was so glad to find your site and the 12" drop hitch I just received. Problem solved. Thanks!

A small shipping glitch , but they took care of it quickly

I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.

This hitch puts them all to shame...I have tried several and that cost more, and this is by far the best hitch I have owned. Absolute must on newer Suburbans and Tahoes due to the high frame. E-Trailer, of course had the best price and I had it in three days! Done! JC

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

I needed a hitch that I could haul my work trailer with and still drop the tailgate without dropping the trailer. I looked on etrailer and found one that would work barely but decided to call etrailer and see if anyone had any ideas. Steve answered and looked after I told him my requirements and came up with this. This has a longer distance from ball to pin by a few inches compared to the one I found so my tailgate will still drop even if I’m at an angle to my trailer or on a hill. Also with the adjustable height it’s great. Awesome hitch. Solid for a good price. ??

I ordered for all the right reasons. Quality, ease of ordering, etrailer presence on social media, free shipping, expedient receipt of products. In “my” haste, one of the features of my B&W trailer hitch does not work on my vehicle. My Chevy Suburban has a rear valance that wii not allow me to rotate the ball hitch underneath the vehicle. I’m very impressed with the Areo silent hitch pin.

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

We have a Pink Tractor (google Mom's Pink Tractor) that we pull to events, mainly in Ks, Ok, Mo, and Ne. We have around 35 events a year we take the tractor to to promote breast cancer awareness. The other day my wife and I were leaving for an event, i had let a friend borrow the hitch to see how he liked it. In less then a mile from the house my wife started complaining about the trailer jerking. That is coming from a lady that really was upset when I paid that much for a hitch. She told me to stop and buy one. (a long and expensive trip, we had to stop at a casino so she could rest her neck) I could write a review with a lot of trailer talk, but, this story tells the story.

PERFECT

Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.

This was an excellent buy and super heavy duty hitch. Works fine for towing my 9000 lb boat with my Suburban.

Great price and value, fast delivery and most important, great quality.

This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.

Did not work on my truck due to custom rear bumper. Looks great on my friend's 2018 F350 4 X 4 diesel!

I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!

works well as either a ball for trailer or link point for bike carrier, but unfortunately the clearance of any of my bike racks above the ball is not enough to back up and link up trailer. still, once unhooked it provides a way of mounting bikes without changing up hitches

This is a high quality product and delivered on time. Unfortunately this product doesn't work in my situation, there is interference on the boat trailer coupling and the bike rack in which the boat trailer cannot clear between the 2 inch trailer ball and the attached bike rack. The clearance between the bike rack and trailer is just enough for the trailer tongue coupler to pass through If there was an option to have a 4 inch drop on the trailer connection this could work well

First of all, the products you find at etrailer are not your garden variety, home depot kind of fair. Much higher quality and grade/weight ratings. So to be able to get hard to find items and then by orderring at least 100$ worth of stuff also get it delivered free in 4 days, is awesome. The prices are incredible too.

Construction and finish of drop down trailer hitch is excellent. Installed on a Chevrolet Suburban it is used to pull a heavy duty 2-axel flat bed trailer. Works great and is easily removed to get garage door closed.

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

I love this thing and it has performed well on several long trips: 3 times to TX and once to IL from NJ plus local stuff. It's somewhat lighter than the other ball mounts I've had and certainly looks nicer. It provides a ton of adjustability and my '17 Suburban needed 9 inches of drop for the utility trailer (Stealth Phantom II) I use to haul motorcycles here and there. One thing I'd rather have is two separate balls or just the 2" alone since the other ball does touch down on extreme driveways I've encountered.

Impressed with website. Found exactly the hitch I wanted. Ordering was easy. Received it quickly. Hitch appears to be of excellent quality, and as described. By suburban 2500 has a higher than average bumper. This hitch solves my issue. Thanks for the integrity of your company. Thank you George and etrailer!

Works great for our various race boats with all different trailers

I have been using the Rapid Adjustable Aluminum Ball Mount hitch for over a year averaging 3 days a week delivering new compact diesel tractors to customers. The hitch has held up very well with no signs of wear. The Teflon black caps on the ball are awesome when hitching up, there is no problem with the receiver sliding onto the ball when miss aligned. I have recommended this hitch to many of my friends and customers, they too are pleased with the hitch.

Excellent service, received the product via UPS the next day. Exactly what I ordered, accurately described on the website. Will do business with etrailer again without hesitation.

The ball mount is just what I needed but I think the packaging could have been stronger. One end was ripped open.