# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.
I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful. Watch the video-it’s pretty good. I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow. I bought a stepup drill bit which worked great for drilling the hole in the chasis. I clamped the hitch onto a floor jack, then rolled it and raised it into position. Used metal shears to easily cut out the heat shield as per the video. Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt. I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip. Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck.
# 2
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 3
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 4
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
This was an excellent buy and super heavy duty hitch. Works fine for towing my 9000 lb boat with my Suburban.
Great price and value, fast delivery and most important, great quality.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Exactly what I ordered and better delivery than expected. I've already installed and everything is perfect.
Excellent item when you’ve got big bumpers!
# 6
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 10" Drop, 11" Rise
I love this thing and it has performed well on several long trips: 3 times to TX and once to IL from NJ plus local stuff. It's somewhat lighter than the other ball mounts I've had and certainly looks nicer. It provides a ton of adjustability and my '17 Suburban needed 9 inches of drop for the utility trailer (Stealth Phantom II) I use to haul motorcycles here and there. One thing I'd rather have is two separate balls or just the 2" alone since the other ball does touch down on extreme driveways I've encountered.
Impressed with website. Found exactly the hitch I wanted. Ordering was easy. Received it quickly. Hitch appears to be of excellent quality, and as described. By suburban 2500 has a higher than average bumper. This hitch solves my issue. Thanks for the integrity of your company. Thank you George and etrailer!
# 7
Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 10" Drop
I love this thing and it has performed well on several long trips: 3 times to TX and once to IL from NJ plus local stuff. It's somewhat lighter than the other ball mounts I've had and certainly looks nicer. It provides a ton of adjustability and my '17 Suburban needed 9 inches of drop for the utility trailer (Stealth Phantom II) I use to haul motorcycles here and there. One thing I'd rather have is two separate balls or just the 2" alone since the other ball does touch down on extreme driveways I've encountered.
This hitch combines the perfect balance of tongue weight and hitch drop. I purchased this for my 3/4 ton suburban pulling a 12' Haulmark trailer...what a dream. the greaseless ball is a bonus to keep pants clean when bumped into. Strongly advise the locking pins... this hitch will be stolen quickly as it is super sharp to look at. highly recommend!!!
# 8
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K
Needed a 2.5 inch shank since I was on the edge of my tongue weight limit with the adapter sleeve. This was a close to my 2 inch shank receiver so it was an easy choice. Great product and packaging and etrailer makes everything simple to find!
Used. Worked great. I bit sloppy and noisy but no issue with function. Easy to swap ball sizes. Worth the money. Would buy again
# 9
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
Very nice product. Works well easily adjustable. My only complaint is it is not long enough. When I have my car trailer with a power jack attached I can not open the lift gate on my Suburban.
I love this thing and it has performed well on several long trips: 3 times to TX and once to IL from NJ plus local stuff. It's somewhat lighter than the other ball mounts I've had and certainly looks nicer. It provides a ton of adjustability and my '17 Suburban needed 9 inches of drop for the utility trailer (Stealth Phantom II) I use to haul motorcycles here and there. One thing I'd rather have is two separate balls or just the 2" alone since the other ball does touch down on extreme driveways I've encountered.
# 10
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K
Great product -it fit my sons truck perfectly. Susan H. Was excellent to work with. She is a good customer service rep.
All in all a good set up. A lot more play in the receiver than I expected. Fair amount of rattling around without a trailer attached. In all fairness I do live in a state with poor roads.
# 11
Flash Secure 2-Ball Mount w/ Chrome Balls - 2" Hitch - 10" Drop, 11" Rise
The quality of the hitch is excellent, plus it looks great on the Suburban. This product was exactly what I was looking for. I have three trailers that I keep in several locations. Now I never have to concern myself with having the wrong hitch on the tow vehicle.
Just recieved yesterday so haven't used but seems very soild and well made. Looks great. Locking system a huge plus.
# 12
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Exactly what I ordered and better delivery than expected. I've already installed and everything is perfect.
Excellent item when you’ve got big bumpers!
What our customers are saying:
"Goods were received. Very professionally done on your part beginning to end. Thanks. J"