Best 2007 Ford Ranger Trailer Hitch Ball Mounts

The hitch was very easy to install, took about 30 min. It fits perfectly to my 2001 Ford Ranger. The tow bar is very sturdy and is very well made! The delivery was fast, I ordered it on a Monday, and it arrived on Friday. I would most DEFINETLY recommend this to anyone who is considering this for a tow bar.

Looks solid Wish the pin was included and priced accordingly

I purchased the entire hitch package (hitch, and all needed accessories ) for a 1993 Ranger 4.0, 2wd. Price was good, but I was a little sad I missed a good sale by only 2 days....Oh well. Everything shipped fast, arrived well packaged, very well that is. Everything in my order, in one large box complete with handles. About half of the stuff was made in the USA the other China, but was happy to see the large items made here. Not installed yet but anticipate no issues. Quality appears to be excellent.

Have not used it yet but looks like it's a very quality product and can't wait to try it out

Excellent product. Do recommend

The product is good but a bit tideous and after installing it my bracket fell and it was a pain to get replace it support made me buy the replacement pieces and the bracket didnt come with just the bolts, and at the end they told i have i had to buy the whole unit because based on their system my truck didnt have issues with installement and the manufacturer didnt supply that bracket cause it special order so in general i dont recommend in my choice better to get it welded.

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

Hard to find item found We have a home with a large back yard with the access layed out so,that only a single vehicle can make the turn around the corner without a trailer,even utility or boattrailer.I had a front hitch reciever on my Suburban and I wanted a long hitch extender for easier handling..It helped even more with the use of my Polaris Ranger,which is short enough and powerful enough to make it around the corner but its hitch receiver is practically on the real axle and the control of the trailer especially backing it is very poor.Instead of an extremely long trailer tongue this extension helps it too. The extender is perfect,nicely finished and arrived within a few days.I want to mention,that the price was very reasonable even with shipping.

Towing a 20Ft. Ranger Bass Rig with no issues after 1 year. Strong Hitch and Ball.

This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.

I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.

This is exactly what I needed for my front end mounted receiver.

As advertised and quick delivery, I am an Etrailer fan!

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Nothing comes close to this trailer hitch mount! Well designed and needed especially if you tow different things. versatility and sleek appearance in stow mode. The only reason I did not give it 5 stars is simply because sometimes the 3 rods you have to remove and reinsert sometimes get stuck and you have to bang it a bit to get one or more loosened so you can remove or reinsert. Maybe graphite spray?

Received the Class II Drawbar 5-1/2" Rise or 6" Drop - BM96 in a timely manner. The rise was what I was looking for to use with my Polaris ATV 570 since its standard receiver is 1-1\4 hitch and sits low to the ground. This was just the right height to pull my john boat behind the ATV.

I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!

Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .

Perfect fit for 2 inch Draw Tite receiver. good price, fast shipping.

We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.

A year has passed with my Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount and I have nothing but praise for this mount. Once you find the correct height to have a perfectly level trailer there's no need to adjust. The beauty lies in the cushioning! Towing a Yamaha AR190 (3200lb boat and trailer combo) is silent. Even over the bumpiest pavement the tow is smooth. There is no harsh slamming when braking or taking off from the boat ramp. I don't know why everyone isn't running one of these, I wouldn't run any other hitch mount PERIOD! If you're on the fence, get off and buy one, you will NOT regret it!

This has been one of the best hitches that I have owned. It is adjustable to change between my Jeep Wrangler and my Ford F-150 Limited. Both have different tow heights and tow needs based on trailer type and payload capacity. This hitch has worked great for those purposes!

Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.

Arrived today. Fast shipping, and thank you for that! Seems to be a quality ball mount. Just what I needed to get the ball lower to tow my trailer. With this, now the top of the ball is at 16" where it needs to be. Custom built receiver on my old moving box van. Just need to weld on safety chain slots and paint it. Can't drop the lift gate with the receiver in (its pinned on both sides), but hey....I can tow now.

Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!

Very nice and sturdy made Hitch. I love the streamlined design. Fast shipping

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

Glad I bought this. Got it for a travel trailer that I picked up 500 miles away in western Montana. Wanted to make sure it would be some what level for ride home. Was able to lock down the latch on top which I thought was awesome!! No worrying about trailer coming unlatched.

This is an absolutely great receiver! I've had zero issues with it and is great for different adjustment of the height for different trucks and trailers. I use this with my car hauler and the adjustability is great feature! Thank you etrailer for the great product I purchased from you. I would recommend this to anyone with multiple trailers and or trucks used for hauling. 5 out of 5 stars

The product was shipped fast and the package was easily trackable. Good communication with the seller and good price. It appears to be made with high quality craftsmanship and finish. Easily changes between ball sizes and stows away for a clean look.

Works as it should. I enjoy not having to hunt for different hitches when switching trailers. So far no rust..

Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.

definitely solid as a rock