Most Popular Pop Up Camper for 2006 GMC Yukon

Good value. Installs easily. In operation, it works smoothly and quietly on my travel trailer with a weight of 680 lbs on the hitch. This jack is not the fastest on the market but quite adequate for the job. I had to modify the pre-drilled holes to avoid it fouling the tailgate on my GMC Yukon,

My Jack arrived DOA. After installing it on my trailer, the Jack didn’t work. The manual crank handle came in handy because I didn’t have time to troubleshoot and repair it at the time. It was just a wire that was no longer connected to the switch but I have to tell you it was extremely disappointing to receive a brand new item that didn’t work. If it had worked out of the box, I’d give it a five star review. You should consider soldering and heat shrinking the wires to the switches or making the wires longer so they aren’t banjo string tight and putting the lug at a strange angle.

The screw on one Jack is damaged and is in unusable. Would like a replacement. Photo attached.

Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.

This sure beats hand cranking! We are in our 70s and ANY help like this electric jack makes going camping better!

This is the second one of these we've owned. Works real good, a bit of over kill. The thing could probably lift the whole trailer.

I purchased this jack for my 2010 Escapade Elite trailer. I finally installed it yesterday. After a quick and minor modification, it fits great and funcltions like a charm. I highly recommend this product to other MC trailer owners. Thanks, etrailer.com for the quality and price!

Gave it a three due to the modifications that had to be done to make it fit. I had to grind down the outside of the pad about 3/16" to make the stabilizer fit up into the bumper of our Scamp. In addition, I shimmed the top down about 5/32 so it would lock into place without forcing it. One stabilizer had epoxy which looks very sloppy. This on the edge where it should be spot welded - hope this is the case! Fortunately, I'd read reviews indicating that this was not a direct replacement for Scamp 13'ers. Folks should be aware they may have to do some work since the stabilizers may not fit out of the box. Once modified, they work as expected.

This is what I needed. I Wanted a little more lbs. of lift so I could lift my truck for weight bars and such. I have a 2014 Rockwood A Fram and needed the mounting holes to line up. After some research, I found Stromberg jet-3755 worked perfectly. I have used it for a year now and no problems. Easy to set up and use. Thank you etrailer

The up/down switch must have been installed upside down. “Up” is actually down, and vise versa.

Do not like the new design. Much slower than the old version and the buttons stick out too far and now I cannot lower my tailgate while the trailer is attached.

This was a direct replacement for my trailer. Simple to install and connect wiring. I did rotate the head of my unit 90 degrees so the front of the jack faces the driver side of the trailer/tow vehicle. This now allows my tailgate to drop fully without interference. Unit arrived on time and in excellent condition. Has functioned properly for several trips in the past year without any issues. My original unit lasted 6 years without any problems until water/moisture got inside the gearbox and contaminated the lubricant causing damage to gears and bushings. I now cover the jack when in storage. Excellent service from etrailer.

This was my second order with etrailer and I have been pleased with the service. Items are shipped quickly and order was accurate each time. The products are high quality and work as described.

We replaced four badly worn 2500 lb jacks with these heavier 5000 lb jacks and are very happy with the quality of these new jacks. They arrived quickly and were a perfect fit. The construction is superior to the jacks we replaced. Your instructional videos were very helpful. Thanks for your excellent service.

After receiving the packages was very severely damaged and there was no Jack.Stand crank and no nuts and bolts.Don't know what else I miss

They seem well built and will do the job that I purchased them for. The installation was fairly simple, I built and welded some mounting brackets to the trailer frame.

Web site easy to use. Trailer jack came in quick. I like not having to wonder if my online order is going to ship or get delivered. Every time i order from this company i get an email they received my order. I get an email that it shipped. I get an email that it was Delivered. Now days its common to place an online order and you take a chance of not knowing if you going to get anything. I recommend this company.

Item arrived a day earlier & in good condition! & was a very easy install ,& is a upgrade from manual one that broke at the handle ,& this is a upgrade for my 2008 22'Airstream Safari! Can't wait for my next outing, Also I like that it comes with a backup manual hand crank in case you need it,& that it was a exact fit for my travel trailer,It's a complete package that needs nothing else.

Jayco camper came with stabilizing jacks in the rear but none in the front. After wife complained that my walking around in the camper in the morning made the bed feel like a water bed I installed these jacks. They work perfect, easy and fast to deploy and camper is now solid when parked.

Very solid and well built, exceeded my expectations. Mounted tonight and the camper is now solid as a rock when parked. It only had rear stabilizers previously and at 19 feet needed the stability in the front. Wifey says previously it felt like she was on a water bed when I was walking in the back. Not any more!

Works great for my teardrop

Very pleased with etrailor product the stabilizer jacks fit perfectly and their prompt service made it possible for us to take off to Henry's Lake Idaho Yellowstone and Grand Teton

I installed the jack today and it works great. I put it on my little equipment trailer that i sometimes have to hook and UN-hook multiple times a day. I appreciate the power source being in the 7 way plug.

I've had this power jack for about a year and it works flawlessly, it beats hand cranking. And not to mention the great service from etrailer their the best in the business.

Great product. works just fine. The problem I had was matching the mounting plate under my trailer. Apparently not a standard so I had to take it to a trailer manufacturer to make it fit.

They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.

I should have got one years ago. I only use it when it's connected to the truck with the engine running. This I believe gives me full power. It has enough power to raise the trailer when connected to the truck to get the anti sway bars attached. Sure beats all that hand cranking.

The alternate power setup makes its slow rate of rise necessary which would be good if my lithium batteries went low. To avoid battery problems be sure to add an inline battery disconnect from the trailer power when using tow vehicle power. I simple added an inline fuse that could be removed should I need to use the tow vehicle power.

leveling jack was delivered very promptly and in good shape. installed on my 5th wheel easily and works fine. a bit lighter duty than the OEM jack but darn good value for the price and will get the job done. etrailer is the best!

Don't like them.These Jack's use an 18mm socket,95% use a 3/4"socket. The Jack's are hard to turn even though I've kept them lubricated.

These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.

we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood

There's not a lot to say. The first Stabilizer carton was damaged to the point the carrier couldn't even find the Stabilizer. etrailer.com was very cooperative & sent a second unit out right away. Although the second shipment packaging was damaged all parts were there and undamaged. I installed the unit and it is so so much better, quieter and faster than the old unit. I highly recommend both Lippert and etrailer.com

The shipping of this part was terrible at best! They packaged the stabilizer in a cheap cardboard box and of course it arrived trashed! And of course it arrived almost a week later than they said it would. The rubber cover for the motor is torn, the main metal beam is dented. This is absolute crap on your part etrailer.

I mounted this Stabilizers Jacks to the back of a 4x8 utility trailer. I use the trailer to haul my Honda ATV to MotoAmerica motorcycle races. Once the ATV is removed I lower the jacks and mount my tent inside the trailer. These stabilizers allow me to safely move around in the tent without fear of the trailer tipping.

Does not ratchet up, a pin must be manually inserted. It only came with one 6" long pin, which needs to be cut in half to make these stands functional. This is more like a folding jack stand, but the pin is not connected to the stand with a lanyard. I will be cutting the bar in half and welding a washer to hold it in place. I will also need to add a lanyard to it so I don't loose it. I would not recommend this product, but I have not found a better substitute for my application.

The CargoBuckle G3 ratchet tie-down straps and 45 degree mounting brackets worked great. Makes loading and unloading a breeze.

This jack was the perfect solution for my application. I have a new enclosed trailer that came with a manual crank and only a tiny battery to run the lights. I did not want the expense of having to buy and cable up a larger battery to just support the tongue jack. Took me 5 minutes to install this new jack using the three bolts that were already on my OEM jack. Now I just back up my truck, plug in the 7-way, and I'm able to move the tongue up and down as needed. Great!

I like the jacks,I didn't weld what was told,I drilled holes in the mounting bracket counter sunk for bolts, I drilled and taped holes to screw mounting bracket to frame, then I used brass angle iron to bolt to mounting bracket and trailer frame to make sure all was secure, bolted everything on to frame using stainless steel bolts and the brackets are brass,so noting rust. I fell much more confident on the way I mounted the jacks ratter then welding and have no distortion or messing up the trailer frame. Very happy on how I did it and it works great.

The box was a little beat up but, after all they are heavy steel parts and they are trying to keep the weight down for shipping coasts. The stabilizers were in great shape. I liked that the mounting brackets are removable and made it convenient to weld in place. The brackets could be bolted on but, you would have to countersink the bolts as there is about 1/8" clearance between the bracket and stabilizer body. I'm very happy with them and would recommend them. I would like to have etrailer show all the dimensions and capacities.