# 1
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
One of the best additions to our 5th wheel yet! I added these myself and it was not too hard, but I do have the proper tools. One install issue was around the pushout where I had to modify a bracket(see photos) We did a coast to coast and stayed in a LOT of places. These jacks worked very well as long as I got reasonably level side to side first. A few inches out is fine so most spots were a breeze, a few I needed to be on blocks so the tires did not come off the ground. The phone app is great to see initial level from the drivers seat, but I did most final leveling from the control pad. Overall great product and I recommend them especially if you are setting and breaking camp a lot.
The system is not what was advertised, it's better, at least for me. Everything arrived on a pallet in excellent condition, except for the advertised remote. I contacted etrailer and they put a replacement on order which I received a few days later. In the meantime, I tried to place the controller in the mode to sync the remote and see if the remote I had with my RV would sync, but I could not get the controller in that mode to accept a remote. Upon reading the controller label, I noticed it said BT and had a passcode on the side of it, so I downloaded the app and it connected to my phone. It seems the LCI Linc remote is obsolete for my Ground Control 3.0 and it is now using the phone app. Everything seems to work as expected; I'm excited to try everything out this weekend on our first outing. I was able to push a fiberglass push stick from the front basement to where the rear jacks are located without dropping the underbelly and pull all the required cables to the rear of the camper and utilize existing frame holes to bring the connectors out to the rear jacks. I think this will be a nice upgrade to our fifth wheel after our factory landing gear failed.
# 2
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
Landing gear was exactly what I ordered. Prompt delivery. Package was perfect. Landing gear just not as heavy duty as I hoped. I'm sure I will be replacing it again in a few years.
Jacks has functioned very good over the last year. No problems or issues encountered .
# 3
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
Let me start by saying this review is about the product, not e-trailer. etrailer is great. I love doing business with them. Their prices beat anybody, and the free and FAST shipping is a bonus. Now to the review of the LG-3 landing gear. The pros of this product are they are a direct replacement for the Lippert system on my trailer. No cutting, drilling or welding. They fit in the original brackets. I installed them while camping in about 2 hours with simple hand tools. The cons are they are a direct replacement for the Lippert system on my trailer. They use the same weak motor, that struggles to lift my trailer. The kit was missing bolts and pins and I had to use my old hardware until I could get back to town to buy new hardware. I wanted to go with the Bulldog 10K system, but wanted something that work with my Lippert remote system. The original system failed. I suspect this one will too. Next time I will go with something heavy enough to do the job. Check out the before and after pics and the pic of what can happen when your jacks fail and you have to resort to using hydraulic jacks to lift your trailer. A $4000.00 repair that could have been much worse.
etrailer has always been amazing. I will continue to business with them. On the other hand, the box was damaged and opened.
# 4
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
Perfect replacement, works great, excellent shipping time and service. Just wish I had got the electric motor that goes with the legs.
Support was great at telling me exactly what I needed for my model of 5th wheel. Product arrived in a couple of days. The landing gear kit came with all parts necessary and fit perfectly.
# 5
Lippert High-Speed Power Stabilizer Jack - Black Waterproof Switch Kit - 30" Lift
There's not a lot to say. The first Stabilizer carton was damaged to the point the carrier couldn't even find the Stabilizer. etrailer.com was very cooperative & sent a second unit out right away. Although the second shipment packaging was damaged all parts were there and undamaged. I installed the unit and it is so so much better, quieter and faster than the old unit. I highly recommend both Lippert and etrailer.com
The shipping of this part was terrible at best! They packaged the stabilizer in a cheap cardboard box and of course it arrived trashed! And of course it arrived almost a week later than they said it would. The rubber cover for the motor is torn, the main metal beam is dented. This is absolute crap on your part etrailer.
# 6
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
Work great and good backup to electrical Jack. Our electricals were not working but now are. Hopefully, they remain as backup as have to handcraft or additional support.
thank you. works perfectly
# 7
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs
Does the job helps to stabilize the front of my 5th wheel.
Great product, i like how it stabilize the front of my 5th wheel.
# 8
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control - 6-Point Set
E Trailer customer service is top notch A+++++, The Lippert ground control 3.0 is an awesome product. Installation was straight forward. Just take your time and it all comes together nicely. All of the wiring is clearly marked and just needs to be routed to the front. The system works great and levels my fifth wheel within 3 minutes. I highly recommend this product.
Let me say this to start, this system is AWESOME!! If you do not have a leveling system on your camper, this one works very , very well. I will say, the install and the learning curve takes time and is not too hard, but it's not super easy either. Once I got the system in place, and understood how to use it, the rest was a piece of cake. Take your time on the install and get help. The parts are robust and heavy, so two people make it much easier. Have sharp drill bits to drill the attachment holes. Wiring is super simple, but take your time and make sure you get all the connections good and tight and secured well with zip ties. The system requires a good strong battery, so make sure your battery is in great shape and you will not have any issues. Get the Lippert app also, it is very helpful. I love it now, when I pull my 2006 Keystone Raptor 5th wheel toy hauler into a campsite, I hit a couple buttons and the longest it has taken to level my unit is 2 minutes and 30 seconds. I love it! It puts the camper at the same level every single time, which is awesome. No guessing, no driving up and down on blocks, just push a button and walk away until the camper is perfect. Would I do this over again you ask? Absolutely. Awesome system!
# 9
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
The Strong Arm stabilizers have worked great. After locking the stabilizers, the majority of trailer movement from walking around in the trailer has been eliminated. I highly recommend.
These are great and made our small 5th wheel rock solid, I mean night and day compared to just landing gear and rear stabilizers. I did have to do some minor fabrication for both the front and the rear. The front was due to the spare tire being mounted under the front of our rig. Also the instructions really suck as do most Lippert components instructions. Way too many words that don't really seem to be coherent, seems like just a few words and some good quality pictures would be more helpful.
# 10
Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs
I recommend this landing gear set to everyone!!!!! After 2 replacements of tandem landing gear sets performed by dealership under warranty and still struggling lifting my 5th wheel, I decided to purchase this upgrade on my own dime. Best money I’ve spent in years. These lift my 15,000-16,000 5th wheel with no issues. Consistent and quiet. I don’t stress out anytime I’m hitching or unhitching anymore. 100% recommend buying. I’ve already talked 2 of my friends to do this upgrade and they love it.
Everything from E-Trailers handling of shipment was smooth and fast. The in-line fuses were broken and very cheap quality. I replaced them with some from O'Reiily's and all worked fine.
# 11
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
Shorter than original not as heavy duty as oem the small bolts that connect both jacks are really cheap. With that being said it works after some grinding it fits. Time will tell on the over all durability
Appears to be good quality. Fit in the existing mounts. Drop leg is a bonus over what was previous.
# 12
Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs
Boxes were torn up. Inside the main shipping box. So it came from etrailer like this. No paperwork at all. Everything was torn apart and scratched. I expected better.
Etrailer was great and shipping was fast. However the shipping was abusive to the packaging resulting in bent shaft on leading jack, which made it impossible to install gearbox for proper operation. Being mechanically inclined I could disassemble and straighten shaft hoping no stress fractures ending its life sooner than expected, or use shaft from previous jack. But why? I bought new parts for a reason.
# 13
Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs
Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.
My fifth wheel landing gear needed replacement. One side would not work. No information on my unit. However, Rochelle of E-Trailers did research to determine a replacement unit. Was shipped to California in 3 days and I installed. Perfect fit !! Thank you Rochelle. Awesome Customer service and great quality.
# 14
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ Less Than 58" Between Landing Gear
The single best upgrade I’ve done to our fifth wheel. Installation took a few hours in my driveway. We camp as a family of four with a dog. Someone sneezing used to shake our trailer - now the stability is greatly improved with almost no shake. Adds a few minutes to setup time - but absolutely worth it.
Love the stabilizers put on front and back of my 33 foot 5th wheel solid it up amazely. Deffintly would recommend them.Thank you etrailer best price and best quality.
# 15
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
A perfect replacement for my old landing gear. Very few adjustments needed to make the legs fit perfect with my existing brackets and a little drilling for the bolt holes. Now at least I know I'll be able to unhook from my truck.
Product was an exact fit for my application only problem I had was key inside gear box fell out but easily fixed once I figured it out.etrailer was spot on helping me find correct jack for my ca.per works great
# 16
MORryde 5th Wheel Cross Brace Landing Gear Stabilizer
Good product and good idea but it doesn't take all of the movement away. Great service from Etrailer.com
I ordered the MoRyde 5th wheel cross brace to stop the shaking in our 26' Winnebago Micro Minnie. The brace was easy to install and does a great job of stopping the trailer shaking; I don't even need to twist it tight. The downside is that it was too long to fit between my jacks so I had to take it to a machine shop and pay them to shorten each brace by 6".
# 17
Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack
# 18
Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift
Ordered a power stabilizer jack for my 2012 Jayco fifth wheel in 2023 , easy to install the item myself , stabilizer working great , will buy future items at this site , thanks
The stabilizer works well. I would buy it again
# 19
Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
Direct replacement on 2005 Pilgrim 5th wheel. Had to notch 2X4 floor joists. If I ever do this again, I’ll be a repeat customer. They have worked flawlessly since the replacement.
Fairly easy install on my 1996 Coachman Catalina Lite 23RB 5th wheel. I had to do a little grinding on one side to make the leading leg fit. I am pleased with the installation and glad to have a working good set of landing gear. The price was great compared to what a local RV dealer wanted for the same landing gear. I saved a few hundred dollars on the landing gear. etrailer was great to work with in finding the right landing gear that would work with my 5th wheel.
# 20
Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs
Great price and service, They shipped one half of jack system and after phone and picture of part I received, they found second have and shipped out the next day. Installed easy, but had to call manufacture to figure out the wiring, manufacture was very helpful also. It been on for a year with lots of use.
Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.
What our customers are saying:
"Great product. fast, professional, and well communicated service. it was a pleasure buying from y'all. thanks again"