Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings

See what our Experts say about this Blue Ox Base Plates

• Flat Towing Recommendations For A 2003 Jeep Wrangler TJ
  The # 63180 Tow Ready tow bar you linked to has a max speed rating of 45 mph so you wouldn't be able to tow your vehicle on the highway. Instead if you're wanting to tow with a ball hitch I recommend the Blue Ox Adventurer Tow Bar with Adjustable-Width Arms - A-Frame - Car Mount - 5,000lbs Item # BX7322. If you have a double tube or standard bumper the Blue Ox Base Plate Kit - Fixed Arms Item # BX1120 will fit your vehicle but this will require some drilling and trimming to fit, as will...
  view full answer...
• Adapter that Could be Used with Warn Bumper of 2021 Jeep Wrangler Rubicon
  As long as the Warn Elite front bumper you are looking at has the 1 inch D-ring you can use the # BX88358 or if they are 7/8 inch you'd instead need the # BX88357. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground. For lighting...
  view full answer...
• Recommended Tow Bar For A 2003 Jeep TJ
  The Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount # BX7380 will work with your 2003 Jeep TJ if you have The Blue Ox Base Plate Kit # BX1120 already installed on your 2003 Jeep TJ. The tow bar has a heavy-duty steel construction and is powder coated to help resist corrosion. It has a weight capacity up to 6,500 pounds . I attached a review video link below.
  view full answer...
• Base Plate Adapter, Tow Bar, & Braking System to Flat Tow 2016 Jeep Wrangler With XRC Bumper
  Thanks for the photo! Glad you're enjoying the site and we can absolutely get your 2016 Jeep Wrangler with an XRC front bumper ready to flat tow. First you'll need the base plate adapters to connect to your D-rings, and the correct one is going to depend on the size of the pin hole on your bumper, which is likely 7/8" but could be 1" so you'll want to verify that size and then you can use either of the following: - 7/8" Pin: Blue Ox Aftermarket Off-Road Bumper Adapter # BX88357 - 1" Pin:...
  view full answer...
  
• Parts Needed to Flat Tow 2021 Jeep Wrangler Unlimited with Off-Road Bumper
  For your 2021 Jeep Wrangler Unlimted with an off-road bumper we have two base plate kit options. We have the part # BX88357 which is for 1 inch D-ring bumper mounts that use a 7/8 inch pin or the part # BX88358 which is for 1 inch d-rings and a 1 inch pin diameter. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420...
  view full answer...
• Complete Flat Towing Setup For A 2007 Jeep Wrangler With A DV8 Bumper With A Winch
  The good news is yes, you can use your DV8 bumper with a winch on your 2007 Jeep Wrangler to flat tow your vehicle. You'll just need to use an adapter like the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars # BX88357, which has a 7/8" diameter pin, or the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars # BX88358; You will just need to verify the size pin you need for your DV8 bumper. Secondly, if you were to install a lift kit, and go with...
  view full answer...
• Blue Ox Compatible Base Plate for a 2018 JL Jeep Unlimited
  Since you have a Blue Ox tow bar, the best base plate for your 2018 Jeep JL Unlimited Sport is going to be the Blue Ox Base Plate Kit item # BX1139. This kit works if you have the factory steel or plastic bumper. I have linked an installation video below so you can understand the process. If you have an Off-Road bumper - with 7/8 inch D-Ring bumper mounts you will need the item # BX88357. If your Off-Road Bumper has 1 inch D-Ring bumper mounts you will need the item # BX88358. For a...
  view full answer...
• Cleanest Looking Base Plate for my 2019 Jeep Wrangler Moab Edition
  Of the two option I have available the Roadmaster Direct-Connect Base Plate Kit part # RM-521453-5 and the Demco Tabless Base Plate Kit part # DM9519339 I really like the look of the Demco model. While it does add more to the front of the vehicle it does it in a very nice factory look. This has all of the attachment points and will keep you from having a pieced together look. When not in use the arms are removable for an even cleaner look. To use this with your Aventa II tow bar use the...
  view full answer...
• Tow Bar and D-ring Bumper Mount for 2010 Jeep Wrangler
  For a 5K rated tow bar, I suggest the Blue Ox Acclaim Non-Binding Tow Bar, # BX4330 with a 2" ball coupler. Then add the Blue Ox Aftermarket Off-Road Bumper Adapter, # BX88357 for a 7/8" Pin or, # BX88358 for a 1" pin D-ring. For a hitch mounted tow bar, and my preferred set-up, I suggest the 6K rated Roadmaster Falcon 2 Tow Bar, # RM-520. Use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars, # RM-035-1 for 1" Thick D-Rings. Or, # RM-035 for 3/4" D-Rings. Please...
  view full answer...
• How To Attach Blue Ox Tow Bar To 1" D-Rings On Jeep Bumper
  It sounds like you're looking for the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars part # BX88358 which are designed for Blue Ox motorhome mounted tow bars and bumpers with a 1" thick d-ring. I have attached a video I did on these below as well.
  view full answer...
• Recommended Flat Towing Set Up for a 2005 Jeep TJ
  We have three different options for base plates depending on what kind of bumper your 2005 Jeep TJ has. If you have the double tube bumper or standard factory bumper you will want the Blue Ox Base Plate Kit item # BX1120. If you have an off-road bumper with flat towing rated d-rings you will need either the 7/8" D-Rings item # BX88357 or the 1" D-Rings item # BX88358 depending on how wide your Jeep's D-Rings are. The rest of the parts you will need to flat tow your 2005 Jeep TJ are listed...
  view full answer...
• Recommended Flat Towing Set Up for a 2022 Jeep Wrangler
  I would be happy to help you set your 2022 Jeep Wrangler up to be flat towed. You will definitely need a supplemental braking system. Even though your motorhome may have the ability to stop your Jeep it is required by law to have a braking system installed on a flat towed vehicle. For a supplemental braking system that is compatible with air brakes you will want the Roadmaster InvisiBrake Supplemental Braking System item # RM-8700. This system offers automatic, real-time braking in your...
  view full answer...
• Can Bestop HighRock 4x4 Narrow Front Bumper Be Used to Flat Tow a 2003 Jeep Wrangler
  The Bestop HighRock 4x4 Narrow Front Bumper # B4493001 is not rated for towing so you'll want to keep the Blue Ox Base Plate # BX1124 installed on your 2003 Jeep Wrangler or find a front bumper that is rated for flat towing and uses D-Rings if you want to avoid using the base plate kit. We don't carry any bumpers rated for towing but I know they exist out there. Once you have one properly rated for your application you just need D-Ring adapters to connect your tow bar directly to the bumper....
  view full answer...
• Front Bumper with D-Rings for 2015 Jeep Wrangler Unlimited that Can be Flat Towed
  For your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper # RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part # BX88358 with your Blue Ox tow bar.
  view full answer...
• Base Plate Solution for 2017 Jeep Wrangler Jurassic Park with Oedro Bumper and D-Rings
  That's actually a bumper that your 2017 Jeep Wrangler Unlimited Jurassic Park edition did not come with from the factory so you would need to go a different route. What you have is an Oedra bumper. Since your aftermarket bumper has D-rings you'd need to go with the D-ring base plate kit adapters like the part # BX88358. This kit fits 1 inch D-rings like it looks like your bumper has. If instead you have 7/8 inch D-rings you'd want the part # BX88357.
  view full answer...
  
• Parts Needed to Flat Tow 2013 Jeep Wrangler with Off Road Bumper
  For a base plate kit tow tow your 2013 Jeep Wrangler that has an off road bumper with 1 inch D-rings you'd need to start with the # BX88358 for a Blue Ox setup. Then for a tow bar you'd want the # BX7420 which is the easiest to use and allows the vehicle to track the best behind the coach. For lighting you'd want the # RM-152-98146-7. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling...
  view full answer...
• D-Ring Adapter For Blue Ox Tow Bar on Jeep Wrangler
  Thanks for that photo, and since you have a bumper with D-ring attachments, you would not need base plates; in fact, base plates wouldn't be able to be installed, so instead you would need a bumper adapter that attaches to the D-ring attachments. Your bumper does need to be rated for flat towing so you'll need to check with the manufacturer to ensure that if you're not certain, but if it is, and if the bumper has a 1" or 7/8" pin hole and the tab is 3/4", 7/8", or 1" then what you will...
  view full answer...
  
• Parts Needed to Flat Tow 2014 Jeep Wrangler with Rugged Ridge All Terrain Bumper
  Your Rugged Ridge All Terrain Bumper on your 2014 Jeep Wrangler does have D-rings on the front of it so you have a few options but you'll need to measure your D-rings. Part # BX88358 is for if you have 1 inch d-rings with a 1 inch pin, part # BX88357 is for a 1 inch d-ring and a 7/8 inch diameter pin. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle...
  view full answer...
• Blue Ox Adapter to Attach Tow Bar to DV8 Bumper with 7/8 Pin Holes and 1 Inch Thick Tabs
  For the D-Ring mounts on the bumper on your 2013 Jeep Wrangler you will need adapter # BX88296. It uses a 7/8 inch pin and fits around tabs that are 1 inch thick.
  view full answer...
• How To Transfer Demco Air Force One To Jeep Wrangler and Use D-Rings with Blue Ox Tow Bar
  In order to setup a new vehicle for use with an Demco Air Force One Supplemental Braking System you'll simply need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System part # SM99209. In order to use the e Blue Ox Aventa LX Tow Bar part BX7445 on a Jeep Wrangler with d-rings you'll need the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars part # BX88357 for 7/8" rings or part # BX88358 for 1" rings. I have attached a video I did on said...
  view full answer...
• Flat Towing Recommendations For A 2020 Jeep Wrangler JL Unlimited Rubicon
  For tow bar wiring I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154. It's a one time setup that splices into your vehicles lighting so you don't have to carry around the magnetic lights and run them every time you want to tow. For braking I recommend the Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530. This braking system is a one time setup as well and also comes with a battery charger to keep your battery maintained while towing....
  view full answer...
• What Adapters can I use for Using the Blue Ox Avail with my Off Road Bumper?
  There are tow fgreat choices for adapters and it will all come down to the diameter of the hole in the D-ring. For a 1" hole use the Blue Ox Aftermarket Bumper Adapter part # BX88358 and for a 7/8" hole diameter use the Blue Ox Aftermarket Off-Road Bumper Adapter part # BX88357. Bth of these will work with d-ring thickness anywhere from 5/8" up to 1".
  view full answer...
• D-Ring Adapter that Can be Used with etrailer XHD Tow Bar
  If the D-rings are 1 inch you'd need the adapter part # BX88358 which compatible with the etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates # e67ZR.
  view full answer...
• Availability of Blue Ox D-Ring Adapter that Fits Smittybilt Stryker Bumper
  I don't have a way to verify what D-ring size you have on your Smittybilt Stryker but if what you have is the 7/8 inch size you would need the part # BX88357 or if they are 1 inch you'd want the part # BX88358. Both of these are compatible with your Blue Ox Alpha.
  view full answer...

Do you have a question about this Base Plate?