Flash Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - 10,000 lbs

Flash Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - 10,000 lbs

Item # DTLBM8200

lowest price pledge

Our Price: $104.95

Ball Mounts

This item qualifies for Free Shipping

Shipping Weight: 5 lbs

Quantity: 
In Stock, Ships Today
Fastway Class IV,10000 lbs GTW Ball Mounts - DTLBM8200
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Class IV
  • 10000 lbs GTW
  • Drop - 2 Inch
  • Rise - 1 Inch
  • Fastway
  • No Ball
  • Built-In Locks
  • Aluminum Shank
Self-locking, solid aluminum ball mount gives you a 2" drop or, when flipped over, a 1" rise. Fits balls with a 1" shank diameter. Supports tongue weight of up to 1,000 lbs and tows up to 10,000 lbs. Call 800-298-8924 to order Fastway ball mounts part number DTLBM8200 or order online at etrailer.com. Free expert support on all Fastway products. Guaranteed Lowest Price and Fastest Shipping for Flash Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - 10,000 lbs. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (445)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

Fastway Ball Mounts - DTLBM8200

Self-locking, solid aluminum ball mount gives you a 2" drop or, when flipped over, a 1" rise. Fits balls with a 1" shank diameter. Supports tongue weight of up to 1,000 lbs and tows up to 10,000 lbs.


Features:

  • Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
  • Convenient, self-locking system locks ball mount to receiver tube
    • Built-in locks can't get lost like other kinds of hitch locks
    • Lock seals are double-sealed to keep out water
      • Resists corrosion
      • Requires no maintenance
    • Uses pick-resistant, tube-style keys (2 included)
  • Ball mount is machined from a solid piece of aircraft-grade billet aluminum
    • Solid aluminum produces a lightweight yet strong ball mount
      • Avoids welds, which can cause weak points that might break
    • Polished finish creates a high-quality appearance
  • Made in the USA


Specs:

  • Fits: 2" x 2" trailer hitch receivers
  • Ball hole diameter: 1"
  • Towing capacity: 10,000 lbs
  • Tongue weight capacity: 1,000 lbs
  • Rise: 1" from the top of the hitch receiver opening
  • Drop: 2" from the top of the hitch receiver opening
  • Distance from center of hitch pin hole to center of ball: 8-1/4"
  • 1-Year limited warranty


Product dimensions

cut away view of locking mechanism in action

This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.



DT-LBM8200 Fastway (Diversi-Tech) Flash LBM Series Locking Ball Mount - 2" Drop, 1" Rise Hitch - Solid Billet Aluminum







Video of Flash Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - 10,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fastway Ball Mounts - Fixed Ball Mount - DTLBM8200 Review

Today we'll be reviewing part number DTLBM 8200, this is the Fastway Flash self locking aluminium mount rated at 14,000 pounds, the solid one piece ball mount with a built-in drop is going to let you match the ball height of your vehicle with the tongue height of your trailer. It's got a convenient self locking system that locks the ball mount to the receiver tube of the hitch. The build in locks are a great feature because they can't get lost like other kinds of hitch locks. The lock seals are double sealed to keep our water, it's also got a stand up ball against corrosion and it does not require any maintenance. See here that this is a solid piece of aluminum so it's going to produce a light weight but very strong ball mount. It's going to come with two keys, they use pick resistance two mouth design, it is slide into the lock here at the front and you see it's going to move the pins in and out. So if I'm in it's going to allow you to slide this into your two inch by two inch trailer hitch receiver then you can push the pins out to engage the pin hole of the hitch and then remove the key to lock the ball mount through the hitch. It's got a nice polish finish, it's going to create a high quality appearance, it avoids wells which can course recourse that may break overtime, so that's the benefit of the solid piece of aluminum. Again it is designed to fit into a two inch by two inch trailer hitch receiver, it's going to give us a borehole diameter of one inch so that's important to know when ch0osing the hitch ball, you want to make sure that the shape of that hitch ball does not exceed the bore hole diameter, it's going to over a toeing capacity of 14,000 pounds with a tongue weight capacity of 3000 pounds. We're going to go and bring in those pins and install this inside of our hitch.

Just slide the shake in, so our pin hole line up with one another, we'll move the key, push the pins out and then removing the key is going to lock it in place. Couple of measurements to go over within this position. We take a measurement from the center of the hitch pin hole to the center of the ball hole, it's going to give some measurement of eight and one-quarter of an inch. This is going to provide a maximum drop of two inches, that's from the ball platform to the inside top edge of our receiver tube, we flip it over we can use it in the rise position, it's going to give us a maximum rise of one inch if we perform that same measurement. The draw board thickness is going to be this portion here, that's going to give some measurement of one inch. That's going to do it for today's review of part number DTLBM 8200, this is the Fastway Flash self locking aluminium mount.

.


Customer Reviews

Flash Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - 10,000 lbs - DTLBM8200

Average Customer Rating:  4.7 out of 5 stars   (445 Customer Reviews)

Self-locking, solid aluminum ball mount gives you a 2" drop or, when flipped over, a 1" rise. Fits balls with a 1" shank diameter. Supports tongue weight of up to 1,000 lbs and tows up to 10,000 lbs.

- DTLBM8200
by:

This is my third DT (FLASH) Draw Bar. All three are in service. They are light weight but have higher GTW capacities then heavier draw bars. The four star rating is due to a couple things: 1) the shank on this Lastest purchase (from Flash) is not completely polished when set in the rise orientation. I used SemiChrome and a buffing when to finish the job. All draw bars fit a little loose in the receiver, especially the DT8200 model causing some rattling and clunking when pulling an unloaded trailer. I resolved this issue by drilling n taping the second hole that was in the receiver side ahead of the lock pin hole and wrenching the draw bar down n to the side. Rock solid now and no more clunking. It's a quite set up. The secure lock is easy to use and is theft proof. 525112


Comments

Still loving the set up. Still looks like new. Make sure you weld a 1/4 plate or nut to the outside of the receiver if you plan to tap and wrench a bolt into the side of the receiver like I described in my previous review. It eliminates the slop but the treads will strip out over time if you dont provide for more bolt threads to be captured when wrenching down the bolt to remove the play in the draw bar. Be aware that the steel bolt WILL wear a spot on the draw bar over time. I stopped using the bolt and purchased a U-bolt and plat to clamp the outside of the draw bar to the receiver to eliminate up/down play. This set up is better because it doesnt damage the side of the draw bar but provides a secure noise-free towing experience. Some guys may not be bothered by the clunking noise when stopping and starting but it drives me nuts. Thumbs up if it doesnt bother you :-

Richard - 06/21/2019

56932

We do have the u-bolt anti-rattle devices that you mentioned available as the Quiet Hitch from Roadmaster as part # RM-061
Roadmaster Quiet Hitch for 2" Trailer Hitches
$25.30
.

-- Rachael H - 6/25/2019


- DTLBM8200
by:

Great product love the way it looks on my truck. No more rust to look at from the back Side of this truck. Love the locking mechanism to. I could see someone walking away With this beauty. All in all its a great tow hitch, love it!!! 613860



- DTLBM8200
by:

Perfect for the Subaru Crosstrek. You do not have to crawl under the vehicle to put the safety pin in place. This ball mount is also very light weight and does not rust. 409316



- DTLBM8200
by:

Great solid hitch but the lock is poor quality. I left it on the truck for several months (with lock protection cap on) and one day I went to remove. Found lock tumbler had shifted and was unable to insert key to remove. Had to drill out lock to get ball mount off the truck. I know have a $80 aluminum paper weight. 591181



- DTLBM8200
by:

This is solid. But also surprisingly light. Installed easily and locking mechanism is very smooth. Wish it came in anodized black: my only complaint. Feels like a value at the etrailer price. I am using on an Audi Q7 so have it flipped over so as to get a 1" rise. 450854



- DTLBM8200
by:

I ordered this because even though mine wasn't broken I wanted a bullet aluminum one. No welds. Good looking, solid, and weighs a lot less than my last one (which is steel). I will begin to put it through the rigors of my towing starting tomorrow. Glad I found this product. 304769



- DTLBM8200
by:

This product was DOA. First I couldn't retract the pins. I followed the troubleshooting guide, and was able to retract them. Then, I couldn't lock it back up. They key got stuck. I followed the troubleshooting guide again. Nothing works. I am in the process of getting a return label from eTrailer. I am not interested in a replacement of the same type. Have read reviews of similar problems. Clearly a manufacturing problem. 246650



- DTLBM8200
by:

I was looking for an aluminum receiver when I came across etrailer.com. Upon searching I found the Diversi-Tech self locking ball mount. Honestly I didn't know these existed. Being one who has lost my keys off the bumper in the past this caught my eye immediately. I called to place the order and the staff was extremely helpful. I mentioned I was leaving on a trip and I was told they would try to get the product to me before I left. I've heard this in the past, but rarely does it ever pan out. Much to my excitement,two days before I left the product was at my door. Very satisfied customer. I will not hesitate to shop with etrailer again. 202550



- DTLBM8200
by:

I work in a machine shop and this is a great piece of hardware to add to your towing arsenal. The built quality is great. I bought this to use on my subaru xv crosstrek with the torklift hitch so it would be easier to get the hitch in and out without crawling under the car to remove the hitch pin. 127210


Comments

Still working Great

Greg M - 04/24/2015

11103

- DTLBM8200
by:

This is a premium ball mount with premium quality. I now have two and I’m very pleased with their appearance, durability and security. A little aluminum polish once a year makes them shine like new. 634400



- DTLBM8200
by:

Excellent product it does show signs of wear but has worked flawlessly. 620413



- DTLBM8200
by:

I am very pleased with the quality and finish of the Flash Self-Locking ball mount. 579433



- DTLBM8200
by:

Great product. etrailer is the best for communication, price and their speedy delivery! 510624



- DTLBM8200
by:

Great Product! Solid, well built, perfect for my Subaru Cross-Trek. Operates exactly as advertised. Love the slide in-out, key lock and roll with your trailer. While a little pricey, it's best in class and only ball mount you'll ever need to purchase. 448449



- DTLBM8200
by:

Really cool hitch and works like a charm! I really like the secure locking mechanism and easy to identify key! 378830



- DTLBM8200
by:

Great build quality / smooth internal components with no issues sticking or binding after 1 year 294164



- DTLBM8200
by:

Great product and very fast shipping! 238902



- DTLBM8200
by:

Great product and very fast shipping! 238901



- DTLBM8200
by:

This Ball mount seems extremely well built, only thing I was expecting was the anti rattle spring loaded balls and there was none to be found on my particular drawbar. Unless they used a stock photo and they no longer provide the anti rattle option. I think this will do a great job paired up with my Stainless Steel Convert-a-ball. 206281



- DTLBM8200
by:

I like this hitch, the key can be a little difficult to mange behind the ball. I I could change anything it would be the distance from the pin to the end of the hitch. It is fairly short and should be 2-3 inches longer. 184818



- DTLBM8200
by:

looks nice but have yet to try it 184478



- DTLBM8200
by:

They key lock works excellent. I'm impressed by the weight rating as it's super light compared to the steel version it replaced. 182260



- DTLBM8200
by:

Love this hitch, looks sweet on my lariat. You'd be hard pressed to find a better product then what these folks are peddling. 10 Stars! 171625



- DTLBM8200
by:

Easiest site ever. Two orders and both were completely painless. Way to go. 161313



- DTLBM8200
by:

Great products. Excellent service Thanks 143229



- DTLBM8200
by:

Excellent Quality 140728



- DTLBM8200
by:

This item was: Delivered in a timely manner, the cost was reasonable, great looks and the quality was superb! I would strongly recommend this Aluminum Ball Mount if asked. Thanks for the efficiency in getting my requested product to me. Philip B. 137120


Comments

Im very satisfied with this particular product and would recommend it to anyone. Thanks for the great service also.Aloha,

Philip B - 06/24/2015

12787

- DTLBM8200
by:

Is a wonderful hitch- the only issue I have is that I would like the "anti-rattle pins" further back. They do not reach the receiver on my Jeep Grand Cherokee. As for etrailer- they are top notch. They called to confirm my unusual order before they shipped, sent me notifications along the way, and even a follow up email to make sure all is well. Would definitely recommend etrailer.com 132134



- DTLBM8200
by:

I purchased this product along with a stainless steel 2" ball. I could not be happier about this hitch! It looks like a piece of art; very shiny. The locking mechanism is a must. It is a little expensive but how often do you buy a trailer hitch? You don't have to worry about anyone stealing it either! I want to give these out for Christmas, they are cool. 119931



- DTLBM8200
by:

This ball mount exceeded my every expectation. The self-locking is bad-ass; and, the anti-rattle is a really nice touch. This thing is a beast! What a great site. I'll be back. 96141



- DTLBM8200
by:

Thank you so much for the fast delivery of the hitch and ball I ordered. It was a snap to install with the accompanying directions. I did'nt have a bit of problem and the Diversi-Tech trailer hitch looks great. Really adds snap to the rear of my Avalanche. Thanks again for the great service. Look forward to doing business with you again in the future. John 91891



- DTLBM8200
by:

Very nice looking and it fits fine. The only problem is the rubber boot cover for the key lock does not seal off very well to the lock hole. 76613



- DTLBM8200
by:

All products that were ordered were received. Excellent quality and service------- thanks much 59655



- DTLBM8200
by:

I like that this product is very light weight and constructed out of a solid piece of aluminum and has the self locking capabilities. Very good product, I am well satified. 7756



- DTLBM9400
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Great products. I am very pleased with the whole transaction. I had a question about my order and it was handled quickly and professionally. I will order from etrailer again and recommend to my friends. 106797



- DTLBM9200
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Exceeded my every expectation. 77390


Comments

The product worked exceeding well pulling a 30 Grady White Marlin. However, I no longer own the boat or vehicle.

Walter - 04/23/2014

3701

- DTALBM6807
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Working with Noah, Jamie, Judy and others at Etrailer.com has been a pleasure. Each associate has been very helpful in completing various orders over the last several months as I prepare for the new RV and trailer. Each associate has proven very knowledgeable and given me excellent purchase advice. The products purchased are of high quality and delivered promptly. 503976



- DTALBM6425
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Nice unit - seems well built, good look ing! 113870


Comments

After a year, still happy with the product. Looks great on our 2014 F350 King Ranch truck

John S - 01/16/2015

8644

- DTALBM7000
by:

Review from a similar Fastway Self-Locking in Ball Mounts


The key driven locks look questionable at first, but they hold just as solid as the pins. I don't think I have pressed it's limits with my power dump trailer, but it definitely meets my needs. I generally hook it up to the top 2" receiver on my torklift 20k receiver. Works great. Feels substantial! 550239



- DTALBM6400
by:

Review from a similar Fastway Self-Locking in Ball Mounts


First of all I received my order lickity split. Thank You! When I opened the Ball Mount, I used the key and turned it to see the pins slide in. One side slightly moved. The key turned but no response. After working it for what seemed a long time, and pushing with my thumb it now works. But I am still a little skeptical of it. Hard to imagine that little amount of pin on both sides will hold 10,000 lbs. Otherwise, it looks really nice and I just used it to tow a single Seadoo and trailer and it held. The true test will be the big trailer. Sherry:) 63724


Comments

Well, I still love the Ball Mount, even thou the first time I took it off the little barrings with the springs,which I believe is the rattle control fell out. Did nt bother to stick them back in since it would happen again. I chased them down the driveway. I have a bolt on the underside of my receiver that I tighten which keeps any rattle happening. I had that installed. It pulls the trailer with no problem. Thanks, Sherry:

Sherry - 07/22/2014

5843

Thanks for the follow up Sherry. I am happy to hear that you do have an anti-rattle device that is working well for you. I also wanted to let you know that Diversi-Tech has redesigned this adjustable ball mount. The new design no longer includes the anti-rattle balls that you chased down the driveway.

-- Rachael H - 7/24/2014


- DTALBM6600
by:

Review from a similar Fastway Self-Locking in Ball Mounts


High quality hitch. Very easy to use. I really like that it is one key for the lock and the adjustment. Really good looking hitch. Price is really good when you price out lock/ball/receiver and this one is adjustable with one key for all. This is our second one purchased after we tried the first one out. 208590


Comments

We have two of these for our fleet of tow vehicles with 80k miles of towing with all working great.

Trevor S - 06/30/2016

19032

- DTALBM6600
by:

Review from a similar Fastway Self-Locking in Ball Mounts


WOW WHAT A CHUNK OF METAL. MAKES ME WONDER, HOW YOU GET EVERYTHING INTO THOSE 2 PEICES OF SOLID METAL. HAVING LOCKS BUILT IN WILL SAVE ME ALOT. AS I HAD 2 KEYED LOCKS BEFORE, BUT WHEN YOU LOAN OUT TO FAMILY THEY DONT SOMETIMES GET PUT BACK ON AND GET STOLEN. YEA THANK'S 128128


Comments

A GREAT HITCH. NO ONE IS STEALING THIS ONE. YOU HAVE A GREAT PRODUCT. KEEP UP THE GOOD WORK. IT LOOK GREAT TOO.

CHUCK L - 04/29/2015

11222

- DTALBM6425
by:

Review from a similar Fastway Self-Locking in Ball Mounts


The hitch is very versatile for multiple trailer heights. The quality of finish is very good. The only drawback is there is up and down play in the receiver were the hitch locks in. This causes some hitch noise when braking due to the play. Locking feature means no theft. Over all a very good buy and worth the extra price 91819



- DTLBM8400
by:

Review from a similar Fastway Self-Locking in Ball Mounts


This is everything I had hoped it would be, and more. Excellent design, quality, and appearance. Locking mechanism works great, and ball mount doesn't rattle. This is a great addition to my new Yukon Denali Hybrid! 90546



- DTALBM7000
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Tow all kinds of trailers,with different size tongues.This hitch makes it quick and easy to change out and level.Awesome! 328584



- DTALBM6600
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Received the hitch recently.....first impressions are that this is a well made product, very well made. Heavy as heck too....which is nice. Mounted it up and locked it in, can't wait to tow with it. Seems well designed as well, the two key holes for locking it in place and adjusting the height have good weather seals as well. Not a lot of play in the moving parts which is nice, no real slop to deal with. 121946



- DTALBM6425
by:

Review from a similar Fastway Self-Locking in Ball Mounts


The ball mount is everything I hoped it would be. I shopped around for a while and etrailer had the best price. The mount no longer has the silencing roller balls you hear people breaking. The finish is clean and rugged. My only concern is that the key is more universal than I wanted. My former DT locking pin key worked on the hitch too. 160145



- DTALBM6600
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Satisfied Received helpful advice, order was taken efficiently and product arrived as promised. Probably a much nicer mount than I need, but I was 5 hours from my truck, the trailer was being built, and I was not sure how much drop would be needed. This one covers a wide range, is attractive, easy to use, and has a convenient locking feature. May or may not need the smaller ball, but like knowing it's there just in case. And it all looks good pulling a Kubota tractor on a 22' trailer. 3683



- DTALBM6600
by:

Review from a similar Fastway Self-Locking in Ball Mounts


The ball mount in itself is awesome. Very solid and heavy and the build quality appears to be excellent. Unfortunately I had to return it and got instead the similar Fastway DTALBM6625-2S - which is for a 2-1/2 inch receiver and also the balls are stainless steel. The reason I had to return it is because I have a 2018 Ford F-250 Super Duty. They come with a 2-1/2" receiver and Ford includes a reducing adapter to get it to 2". The issue was that the lock mechanism on the Fastway does not send the lacking rods out far enough to engage BOTH the adapter sleeve and the 2-1/2 inch hitch - so the entire thing would just slide out. This was not a product flaw, I should have considered better how the locking mechanism worked before ordering. E-trailer was great with the return process, even provided a downloadable return shipping label at a reasonable cost and I got the refund to paypal the same day they received it back. I again got from etrailer their Fastway DTALBM6625-2S which is an absolute BEAST as well and looks great on the truck. 487197



- DTALBM6825-3S
by:

Review from a similar Fastway Self-Locking in Ball Mounts


Love the way it looks. However there are to many moving parts. the fit of the ball support bracket to the vertical slide shaft is loose and allows to much movement. Because the alluminum is soft I am already seeing wear on the spline. Also was loose fit into my receiver. I had to add a set screw to keep it tight in the sleeve. At this rate I expect I will have to replace it within 5 years. Great product if you don't haul heavier loads or if you do not use it very often. I would not buy it again. 572998


50
462
Show More Reviews

Ask the Experts about this Fastway Ball Mounts

Do you have a question about this Ball Mount?


  • Short Ball Mount Recommendation for a 2013 Volkswagen Touareg
  • Having a ball mount that is longer should not be an issue. It actually can provide more clearance when turning. The standard for a 2 inch ball mount is around 8 to 8-1/2 inches from the center of the hitch pin hole to the center of the ball hole. We currently offer several aluminum ball mounts for 2 inch hitches that have a 2 inch drop. Alumistinger, # AM3503 Self-Locking ball mount, # DTLBM8200 Solid aluminum ball mount, # DTBM5200
    view full answer...

  • Recommended Two Inch Hitch Ball To Use With Fastway Aluminum Ball Mount
  • The ball mount you referenced, part # DTLBM8200, has a hitch ball shank hole that measures 1 inch diameter and the platform measures 1 inch thick. After doing more research I found that the shank on the # SC23-C hitch ball is actually 2-1/8 inches long. The shank is considered a medium length on this hitch ball. A medium shank is considered between 2 and 3 inches. When installing a hitch ball, after the nut and washer have been installed, there should be at least one thread showing below...
    view full answer...

  • Are Hitch Balls Made of Aluminum
  • I know of no aluminum hitch balls. Steel - raw, chrome plated or nickel-plated - is the material of choice for a hitch ball due to its tensile strength, which far exceeds that of aluminum. Tensile strength is the measure of the force required to pull something to its breaking point. High-tensile-strength steel is about 4 times as strong as aluminum and 3 times as strong as stainless steel. We do offer billet aluminum ball mounts like the fixed type # DTLBM8200 and the adjustable...
    view full answer...

  • Recommended Lubricant for Diversi-Tech Self-Locking Aluminum Ball Mount # DTLBM8200
  • Diversi-Tech recommends lubricating their self-locking ball mounts with air tool oil. Air tool oil is thin enough so that it will work its way through the various parts of the mechanism, but not so thick that it will become sticky and attract dirt and grime. Place a few drops on the pins that secure the ball mount into the hitch and the lock, then lock and unlock the lock several times to work the oil into the mechanism.
    view full answer...

  • Fastway Locking Aluminum Ball Mount Recommendation with 1 inch Diameter Hitch Ball
  • If you are looking for a locking Fastway Aluminum Ball Mount that has a 1 inch diameter ball hole the part # DTLBM8200 is what you want. The # DTLBM9200 having a diameter ball hole of 1-1/4 inch would be too large.
    view full answer...

  • Ball Mount Recommendation for a 2015 Chevy Silverado 2500HD with 2-1/2 inch Hitch
  • I have a solution for you, but the Diversi Tech Ball Mount part # DTLBM8200 is designed to fit 2 inch hitches so it wouldn't work for your truck that has a 2-1/2 inch hitch. For a ball mount confirmed to fit your hitch size with the same amount of drop (2 inches), you would want the Curt Forged Ball Mount part # C45456. This ball mount has a 20k capacity which would be way more than you would need. For a 2-5/16 inch ball you would want part # 63840.
    view full answer...

  • Will Flash Self-Locking, Aluminum Ball Mount # DTLBM8200 Fit 2017 Ford F-250 Hitch
  • The Flash Self-Locking, Aluminum Ball Mount # DTLBM8200 that you referenced is a fit for 2 inch trailer hitches like what comes on most vehicles. If your 2017 Ford F-250 has a 2 inch hitch (measured internally height and width), this this would fit and work well for you. The locking pins would also work too. If you have a different hitch size like 2-1/2 inch or 3 inch let me know and I'll come up with a solution for you.
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael L
Updated by:
Lindsey S
Video Edited:
Patrick B
Written by:
Raymond P
Expert Research:
Jameson C
Video Edited:
Kathleen M
Updated by:
Laura H
Installed by:
Cole B
Photos by:
Sam P
Installed by:
Randy B
Photos by:
Zach O
Updated by:
Shelly K
Updated by:
Sarah W
Expert Research:
Victoria B
Updated by:
Amanda M
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924