See what our Experts say about this Westin Accessories and Parts

• Rear Bumper for a 2003 Dodge Ram Van 1500
  I do have a rear bumper you can use on your 2003 Dodge Ram Van 1500 but we do not carry any OEM parts. You would need to contact your local dealer's parts department in order to obtain an OEM bumper. However, you can use the Westin Fey Surestep Rear Bumper part # 76001 which is the bumper you referenced and very similar to the one in the attached photo with the Installation Kit for Westin Surestep Bumpers part # 92230. The bumper brackets will be an exact match for the bumper but you will...
  view full answer...
  
• Installation Kit for Westin Diamondstep and Surestep Bumpers on a 1985 Chevrolet C/K Series Truck
  It does not Mike but I have a couple sets of brackets that will. For your 1985 Chevrolet C/K Series truck, you'll need the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers item # 92230. This is a universal installation kit that does require drilling to complete the installation. It works with the C10, C20, and C30 models. The Westin Installation Kit for Diamondstep and Surestep Replacement Bumper item # 92200 is also a universal installation kit. It...
  view full answer...
• Westin Bumper Brackets For A 1966 Ford F-250
  Hi Dustin, nice truck! While we definitely have a hitch that will fit your 1966 Ford F-250, the brackets for the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel # 21000 are going to be a bit more difficult. Westin only offers these for the 5th gen (starting in 1967) to the 9th gen (ending in 1996 for 1/2 tons and 1998 for 3/4 and 1 tons). With that being said, you are going to have to drill into your frame to install the Curt Trailer Hitch Receiver - Custom Fit - Class III -...
  view full answer...
• Brackets for Installation of Westin Fey Diamondstep Rear Bumper on 1972 Ford F-250
  Hi Daniel; is this for a 1972 F-250? Assuming you have the standard bed model, the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 20002-92230 comes with the brackets you need. It is the bumper # 20002 and the installation kit # 92230 all under one part number.
  view full answer...
• How Long are the 1/2 inch Bolts of the Installation Kit for Westin Diamondstep
  Hey John, the 1/2 inch diameter bolts that come with the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230 are 1-3/4 inches long.
  view full answer...
• How Wide is the Westin Fey Surestep Rear Bumper 61001?
  Hey Laurence. The Westin Fey Surestep Rear Bumper item # 61001 is 61-1/16" wide. There are no custom mounting bracket kits for a 1973 Jeep Commando. The Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers item # 92230 would require modification but you could use them if your existing mounting brackets don't work. How wide of a bumper are you needing? You can add this information, along with any other questions you have, where it says Reply to Jerred H.
  view full answer...
• Installation Kit Required To Install Westin Fey Surestep Bumper On a 1973-1978 Ford F-250
  The Installation Kit # 92230 is the kit you need to install one of the Westin Fey Surestep Bumpers # 20022, # 21002 or # 21007 on your 1973-1978 Ford F-250.
  view full answer...
• Do You Have the Mounting Instructions for the Hardware Kit # 97800 for My 1998 Chevy 2500?
  I have an answer for you. Unfortunately, confirmed with Westin that the Custom Installation Kit for Westin Diamondstep Bumpers # 97800 are only customized to fit 1987-1996 Dodge Dakotas. However, with that being said, we do offer mounting hardware customized for your 1998 Chevy 2500 (long bed/regular cab) that will fit the Westin Diamonstep Bumper models for your vehicle. For the hardware, you need the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230....
  view full answer...
  
• Replacement Rear Bumper with Custom Installation Kit for a 1996 Ford F-250
  Hey Blair. The Westin Fey Diamondstep Rear Bumper with Custom Installation Kits like item # 21000-92230, item # 21007-92230, and item # 20000-92230 do not have a mount for a 7-way connector. These bumpers all fit the 1996 Ford F-250. What you'll need to do is use the No-Drill Mount Bracket, Long item # C57202 and the TowSmart Mounting Bracket for 7-Way Connector Plug item # TS64RR. These mounts will attach to the crossbar of your F-250's hitch and provide a mounting location for your factory...
  view full answer...
• What Westin Fey Diamondstep Bumper and Hardware Fits My 1984 Chevy K10?
  I have the bumper you need! Unfortunately, I confirmed with Westin that the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel # 73000 does not fit your 1984 Chevy K10. However, we have the exact same model in chrome plated steel that does fit. I did confirm with Westin that this model only fits for fleetside models. We unfortunately do not carry bumpers if you happen to have a stepside model K10. If you do have the fleetside, the bumper you need is the Westin Fey Diamondstep Rear...
  view full answer...
• Correct Westin Bumper And Installation Kit For 1997 Ford F-350
  I have several solutions for you but the bumper part # 66000 is not a confirmed fit for your 1997 Ford F-350. Included is a link to all the confirmed fit options in colors black # 20000-92230, silver # 20002-92230, and chrome # 21000-92230. The correct installation kit is the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe Bumpers # 92230 which is included with the bumper kits purchased.
  view full answer...
• How To Attach a Westin Fey Diamondstep Rear Bumper To Vehicle With No Custom Brackets
  In order to affix an aftermarket bumper to a vehicle in which a custom bumper is not available for you'll need to measure the length of the bumper and then compare this to the list below for the best fit match. - Westin Fey Diamondstep Rear Bumper # 65000: 64-1/2" - Westin Fey Diamondstep Rear Bumper # 63000: 64" - Westin Fey Diamondstep Rear Bumper # 61000: 61-1/2" Once you have the best match as far as length goes, you'll need to make up a custom set of brackets or modify the existing...
  view full answer...
• Bumper Brackets that Fit 1978 Chevy C10
  We have bumper brackets that fit your 1978 Chevy C10 like with the part # 92230 for Westin bumpers like the # 21000 but the # 92500 does not fit your truck.
  view full answer...
• Do the Mounting Brackets Come with the Westin Fey Bumper # 73000 for a 1994 Chevy C/K Series Truck?
  I have a great alternative for you. I went ahead and called my contact at Westin, and he confirmed that the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel # 73000 does not come with mounting hardware and it will not fit your 1994 Chevrolet C/K series pickup. With that being said, Westin does have bumpers that will fit, but they only carry black and silver options (not the chrome option). For the black option, you bumper you need is the Westin Fey Diamondstep Rear Bumper - Black...
  view full answer...
• Mounting Bracket Width for Westin Fey Surestep Rear Bumper - Silver Powder Coated Steel
  Hey Umesh, thanks for reaching out! The Westin Fey Surestep Rear Bumper - Silver Powder Coated Steel # 20022 has the brackets spaced out 36-1/4" inside to inside (see attached). The bracket kit # 92230 that comes in the Bumper and Bracket Kit # 20022-92230 you're looking at has 1-3/8" offsets and it looks like they need to be positioned so they are narrowing in more so it looks like this will fit 33-1/2" vehicle frames.
  view full answer...
• Replacement Rear Bumper For A 1981 GMC C/K 3/4 Ton Truck
  According to Westin-Fey's fitment guide a 1981 GMC 3/4 ton C/K series truck would require the Westin Fey Diamondstep Rear Bumper # 21000 along with installation kit # 92230.
  view full answer...
• Which Mounting Brackets for 1996 Ford F-150 to Install Westin Fey Diamondstep Bumper
  The correct mounting kit for a 1996 Ford F-150 to use with a Westin Fey Diamondstep Bumper like the # 71000 is the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230.
  view full answer...
• Which Black Westin Bumper will Fit My 1993 Dodge Ram D350?
  Hello Ernesto, Thanks for writing in! The Westin Fey Diamondstep Rear Bumper # 20009 will not fit your 1993 Dodge Ram D350 long bed dually. That bumper is designed for the newer 1994 to 2002 Dodge Ram body style. For your truck, you'll want the Westin Fey Diamondstep Rear Bumper # 20000 along with the mounting kit # 92230. That combination is designed for the 1981 to 1993 Dodge D350 and will give you the correct fit. Are you replacing a damaged bumper, or are you fixing up your D350...
  view full answer...
• Can I Use the Westin Fey 61000 on a 1996 Toyota 4 Runner
  I checked with Westin and the # 61000 is not a confirmed fit on your 1996 Toyota 4Runner, but you may be able to make it work if the bumper you're replacing is 61-1/2" long. If this is the correct length, you can use the # 92230 kit to mount this bumper on your vehicle.
  view full answer...
• Installation of Westin Diamondstep Bumper on 1995 Ford F-150 with Reese Hitch Installed
  You can use the Mounting Hardware for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230 to install a Westin Diamondstep Bumper even with a hitch attached to the rear of the vehicle. If you check out the installation video that's attached to this answer you can see that the bumper is installed with a similar Reese hitch already installed, so you won't have any interference with the two. With that said, the correct Westin Diamondstep bumper for your 1995 Ford F-150 can...
  view full answer...
• How to Install a Westin Fey Surestep Rear Bumper on a 2003 Dodge Van
  Yes, I believe the rear bumper you are referring to is the Westin Fey Surestep Rear Bumper part # 21002. In order to install this bumper on your 2003 Dodge Van you will want to use the Installation Kit for Westin Surestep Bumpers part # 92230. This kit will be a direct match for the bumper but will require modifications in order to mount on the vehicle.
  view full answer...
  
• What Westin Fey Surestep Rear Bumper and Mounting Kit do I Need for 1987 Ford Bronco?
  Hello Jim, Thanks for writing in. Yes, the Westin Fey Surestep Rear Bumper # 76001 will fit your 1987 Ford Bronco. You will also need the Westin Fey Diamondstep and Surestep Rear Bumper Mounting Kit # 92230 to get it installed on your Bronco. We do currently have 4 used # 76001 bumpers available as well. You will need to go directly to the # 76001 product page on our site to see the details, condition, and current pricing for each of the used options. You can also see the current price...
  view full answer...
• Will Westin Fey Surestep Deluxe XLT Rear Bumper Fit 1995 Ford F-350
  Hey Gary! Yes, the Westin Fey Surestep Deluxe XLT Rear Bumper # 21007 will fit your 1995 F-350 as long as you have the standard bed. You will also need the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230. What do you typically tow or haul with your F-350?
  view full answer...
• Will the Westin Fey Diamondstep Rear Bumper Fit a 2014 Ford E-250
  The Westin Fey Diamondstep Rear Bumper # 20002 may fit your 2014 Ford E-250 but you'll need to confirm this on your end as there aren't any custom-fit replacement bumpers for your vehicle. This bumper has a length of 74-1/2" and you'll basically need to come up with your own mounting brackets because the mounting bracket kit # 92230 that's recommended for this bumper is designed to fit some older pickups.
  view full answer...

Do you have a question about this Accessories and Part?