This short cable is capable of carrying 50 amps for connecting Redarc's MIDI fuse kits to a positive battery terminal. The short length combined with the fuse kit provide protection of the wiring connected and minimizes voltage drop.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everybody. I'm Ellen here at etrailer.com, and we're taking a really quick look at the battery to fuse holder cable. This is for your REDARC mini fuse holders. So this is going to help you to get that load going from one area to the other, without any worries about any kind of voltage drops. So this is going to be able to handle the 50 amps to go from your battery to the fuse, and make sure that you don't have any issues with that.So on either end it does have some heat shrink to provide a good connection, and should be a nice little cable to make that connection pretty easily. One side is a bit bigger than the other.
So our battery lug hole end, that's going to be a five 16th or M8 ring terminal there. The other side for our fuse end, that is a three-sixteenth or an M5. The wire gauge is seven AWG, or American wire gauge. Measures about six inches from center to center of each of those holes. So it should give you about six inches between the two.
And again, the current rating for this is 50 amps. You don't have to worry about any kind of volt drops since it's just such a short length, and you can use this on both start and auxiliary batteries. It's compatible with all of the REDARC, BCDC, Manager30, and Red Vision products.And that's pretty much all there is to it for our quick look at the battery to fuse holder cable. I hope that this has been helpful in the setting if this is the right part for you. We do have a lot of other REDARC accessories here at etrailer.com, along with a whole bunch of other wiring accessories in general.
So be sure to check them out. Thanks for watching.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
This short cable is capable of carrying 50 amps for connecting Redarc's MIDI fuse kits to a positive battery terminal. The short length combined with the fuse kit provide protection of the wiring connected and minimizes voltage drop.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.