Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round

Ask the Experts about this Lippert Components Accessories and Parts

• Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Attachment Dimensions
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 installs using a horizontal pin attachment, just like the similar parts # UF17-940006 and # UF17-940007. The photo I linked for you shows a close-up of the foot pad's attachment tab so you can compare to yours. The rectangular tab measures 1-1/2 x 5/8-inches and the hole diameter is 3/8-inch. These extra-large 9-inch pads, sold as a set of two, will reduce the tendency for the trailer jack to sink into softer ground...
  view full answer...
• Foot Pad Replacement Recommendation for 2017 Jayce Pinnacle with Ground Control Level System
  Sounds like you have a set of Lippert Ground Control Leveling Jacks # LC358590 on your trailer which would require the replacement foot part # LC377962 if that's what you are in need of. This is for round legs that have a pin in them.
  view full answer...
• Best Option for Foot Pad for Lippert Level Up
  Lippert does not make the specific foot pad for the Level Up system a replacement part, so the best option for a replacement is the Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667. Please keep in mind this may require you to source a different size bolt in order to fit the Level Up.
  view full answer...
• Lippert Round Foot Pad Installation on Standard Square Landing Gear Leg
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 does go inside the square leg that holds the pad. I've attached a photo to assist. It will fit the standard landing gear tube dimensions like you have on your 2009 Jayco 5th Wheel Trailer.
  view full answer...
• Can the 9" Round Foot Pad # LC314667 be Used for Rear Jacks
  The 9" Round Foot Pad # LC314667 is actually meant to be used to replace rectangular 5th wheel RV landing gear foot pads. Since most rear foot pads connect to a round tube you are probably going to need part # LC377962 instead.
  view full answer...
• Replacement Landing Gear Foot Pad for Fifth Wheel Trailer
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 does not fit fifth wheel trailers it fits the landing gear on those trailers and you would only really need to know the manufacturer to be sure the pads will fit. If it's Lippert, these foot pads will absolutely work.
  view full answer...
• Replacement Foot Pad Recommendation for Lippert 3.0 Ground Control Leveling Jacks
  For your Lippert Ground Control 3.0 Electric 5th Wheel Leveling System # LC358590, you would want the Lippert Components 5th Wheel RV Land Gear Foot Pad # LC314667 for a replacement. We spoke with my contact at Lippert and he confirmed that these pads will work with the Ground Control system as long as your leveling leg has a hole in the end of the leg to slip the pin though to secure the foot pad. The # LC314667 comes with 2 foot pads that each measure 9 inches in diameter.
  view full answer...
• Will Lippert Components 5th Wheel Foot Pad Fit 2020 Genesis Supreme Vortex Model 3317
  Yes the Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 does fit the landing gear you have on your 2020 Genesis Supreme Vortex model 3317.
  view full answer...
• Will Lippert Landing Gear Foot Pad # LC314667 Fit Keystone Montana Fifth Wheel
  Yes, Keystone Montana fifth wheel trailers use Lippert landing gear sets like what the Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 you referenced is designed to fit.
  view full answer...
• Will Lippert Components 5th Wheel RV Landing Gear Foot Pad Fit Landing Gear Feet and SnapPads
  I checked with Lippert and the 5th Wheel RV Landing Gear Foot Pad # LC314667 fits most power landing gear systems. The system on your 2011 Heartland Sundance is most likely a Lippert brand or another company that is owned by Lippert so it is extremely likely that it will fit. I took a look at the SnapPad Xtra and it will work with these foot pads.
  view full answer...
• Replacement Foot Pads for 2012 Heartland Elkridge 5th Wheel Trailer
  The Lippert foot pad # LC314667 is a 9 inch diameter pad that is a fit for the automatic leveling systems. You may alternatively be interested in the rear foot pad # LC377962 or the front foot pad # LC362486. You may also want the Replacement 3/8" x 3" Snapper Pin # LC225598. If you do not have the Ground Control Auto Leveling system, then I recommend the Replacement Footpad and Pin for Stromberg Carlson Landing Gear # LG-119225 which fits most other landing gear system. The pad gives...
  view full answer...
• Lippert Foot Pad Recommendation for Heartland Landmark with Lippert Level Up System
  Replacement foot pad # LC314667 isn't the exact replacement for your Level Up system. The one for the Level Up is not available as a replacement. But you could use # LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will thread onto the bottom of the jack leg in place of the 7/16 bolt that comes with # LC314667.
  view full answer...
• Are Round Replacement Foot Pads for Power Landing Gear an Upgrade
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 are absolutely an upgrade over standard foot pads for power landing gear systems. The reason for that is 2-fold: 1) they are large at 9 inches in diameter which means they are much wider than what you have, helping to distribute weight and 2) they are round, which means they are going to be more stable than a standard rectangular foot because they more evenly distribute the weight.
  view full answer...
• Does Lippert Components 5th Wheel RV Landing Gear Footpad Come in Quantity of Two?
  The Lippert Components 5th Wheel RV Landing Gear Foot Pads # LC314667 come as a pair and there is not an option to purchase a single pad separately. There are single footpads available which would work for you such as the Stromberg-Carlson # LG-119225 if you don't mind having different size and shape footpads; or you could get two of these to have matching pads, which would still be less expensive than the Lippert pads.
  view full answer...
• Will Lippert 5th Wheel Landing Gear Foot Pad # LC314667 Fit 2012 Keystone Cougar 324RLB
  Based on my research your 2012 Keystone Cougar 324RLB 5th Wheel Trailer should be equipped with a Lippert Landing Gear system. If this is the case the Landing Gear Foot Pad # LC314667 that you referenced will work perfectly. These will replace the existing rectangular feet with 9 inch diameter pads to provide better stability.
  view full answer...
• Will the Lippert Components Landing Gear Foot Pad Fit the Ultra-Fab Landing Gear Set
  I went out to our warehouse and test fit the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 to the Ultra-Fab Deluxe Electric Landing Gear Set part # UF17-943010. The pin that is used to secure the foot pad to the leg will fit but the location of the pin hole on the foot pad does not align with the location of the pin hole on the leg. Therefore, they will not work with one another out of the box. However, if you were to use a slightly longer bolt to attach the pin...
  view full answer...
• How to Give your Lippert Landing Gear a Larger Footprint
  I am not familiar with the Happijac Elephant Foot therefore would not be able to provide you with the pros and cons but the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is a circular replacement foot pad for the standard rectangular foot pad that came with most powered Lippert landing gear systems. The 9" diameter foot pad will provide a much larger surface area than the standard foot pad which will increase stability and reduce sinking on soft porous surfaces....
  view full answer...
• How do Lippert Components 5th Wheel RV Landing Gear Foot Pads Install
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 you referenced will just use your existing foot pad's pin to install. Please keep in mind your current foot pad would need to attach with a 7/16" bolt in order for this Lippert pad to work. I'm not 100% sure what you are referring to in regards to o-rings, however. I have added a link to a video review of the Foot Pad # LC314667 for you to check out as well.
  view full answer...
• Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Fit My Landing Gear Legs
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is designed for the Lippert Ground Control 2.0 Electric Leveling System. The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486 is designed for the Lippert Ground Control 3.0 Electric Leveling System. If you did have a Lippert Ground Control Electric Leveling System then most likely it would be the 3.0 and not the 2.0 therefore the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486...
  view full answer...
• Recommended Foot Pad and SnapPads for 2004 Gulf Stream Conquest Ultra Supreme
  For your jack pads, I recommend the Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667. Then you can use the SnapPad Jack Pads for 5th Wheel Campers w/ 9" Round Jack Feet - Qty 4 # SN84FR.
  view full answer...
• Will Jack Foot Pad # LC314667 Fit 2018 keystone Impact 361
  Yes, the Jack Foot Pad, # LC314667, will work on your Keystone Impact as this product will fit Lippert landing gear like what would be on your RV.
  view full answer...
• Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad Fit a Heartland Fifth Wheel
  Yes, the Jack Foot Pad, # LC314667, will work on your 2010 Keystone Montana as this product will fit Lippert landing gear like what would be on your RV.
  view full answer...
• How Many Foot Pads Are Included with Lippert 5th Wheel Landing Gear Pad # LC314667
  The Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667 referenced in your question includes 2 foot pads. The listed price on the product page is for both pads together.
  view full answer...
• Will Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 Fit a 2008 Keystone Montana
  Your 2008 Keystone Montana Mountaineer should have Lippert landing gear on it. If that is the case then the foot pad # LC314667 will fit for sure. Even if it isn't Lippert landing gear the foot pad will still fit most other brands of electric landing gear so I do not foresee any issues!
  view full answer...
• Will Lippert Components 5th Wheel RV Landing Gear Foot Pad Fit 2016 Forest River Fifth Wheel Trailer
  While the Lippert Components 5th Wheel RV Landing Gear Foot Pads # LC314667 are not designed specifically to fit trailers such as your 2016 Forest River Cedar Creek Silverback fifth wheel these foot pads should work for you. I looked up an owner's manual for Forest River fifth wheels which does specify it uses Lippert landing landing gear so the Foot Pads # LC314667 are likely to fit your trailer, but you will want to verify that in your owner's manual to be sure. I contacted Lippert...
  view full answer...
• Will Lippert RV Landing Gear Foot Pad # LC314667 Fit an Alpha See YA Class A RV
  Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 takes a 7/16 inch bolt. In order for it to fit your jack leg the bolt size would need to be the same. You can also check for any part numbers on your jack system and I can check if there is an exact replacement for it.
  view full answer...
• Will Replacement Foot Pad for Lippert Landing Gear Fit a 2008 Carriage Carri-Lite
  If your trailer uses Lippert electric landing gear and has a hole in the bottom of the inner leg that normally holds on a foot then yes, foot pad # LC314667 will fit. If you have a different brand of landing gear let me know what it is and I can see if we have an exact replacement.
  view full answer...
• Replacement Foot Pads for Lippert Ground Control 3.0
  The replacement foot pads for the Lippert Ground Control 3.0 # LC675817 (6-Point Set) or # LC358590 (4-Point Set) are different; the Replacement Rear Foot Pad # LC377962 has a circular receiver tube and the Replacement Front Foot Pad # LC362486 has a square receiver tube. Since you have the 6-point system and said you lost the left middle I believe you need the Front Foot Pad # LC362486.
  view full answer...
• Recommended Landing Gear Foot Plate for 9 Inch Round Upgrade on 2016 Flagstaff Super Lite 5th Wheel
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is compatible with your landing gear leg. The Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work for your system if the outer diameter is 2 inches by 2 inches at the foot and the pin diameter is 3/8 inch which is typical. I've attached a video to assist.
  view full answer...
• Replacement 9 Inch Round Foot Plate for 2009 K-Z Inferno 5th Wheel Toy Hauler
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the pad you will need as a replacement
  view full answer...

Do you have a question about this Accessories and Part?