Can a Bent Landing Gear Foot Pad Be Used With a SnapPad?

Question

Question:

Hello, I am looking at purchasing a set of snap pads for my 2013 forest river Georgetown class A motor home. One of my pads is bent I bought motor home used and was already bent. Will the snap pads still work if one is bent or will the pad have to be replaced for a secure fit? Thank you for your time and help.

asked by: Brian W

0

Expert Reply:

The feet on your motorhome's landing gear should not be bent at all, and for a SnapPad like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 you're looking to fit, it's going to need to be replaced.

For instance, if you had a Lippert Landing Gear and needed a replacement 9" foot to work with the SnapPads mentioned above, you'd need the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667.

expert reply by: Bryce D

0

Answer 1

For your 2021 Dynamax Isata 5 30FW with four 10" octagon shaped jack feet I recommend the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet- Qty 4 #SN76FR. This pack will have 4 heavy-duty rubber SnapPads…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item #PUL28RR. The PullRite SuperGlide 5th Wheel Hitch item #PUL28RR has a 24,000 lbs capacity and…

view full answer...

Can a Bent Landing Gear Foot Pad Be Used With a SnapPad?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching