Replacement Wire Lock Safety Pin for Demco Tabless Base Plates - Qty 1

Video Transcript for Demco Tabless Base Plates Wire Lock Safety Pin Replacement Review

Hey everybody, Ryan here at etrailer. Today we're going to be checking out the Demco replacement wire lock pins for the etrailer.com and Demco base plates. So, this here pen is going to be a direct replacement for the one that came with your base plate whether it's a Demco or an etrailer. And, these are going to hold in the removable tabs there. All right, so when you go to put this in, the tab into the base plate, rotate it about a quarter turn, and then that's where the pin is going to go through to essentially lock it into place there. So, this is one of them things that are just easy to lose.

You know, you're taking this apart, and you set it down on your bumper or whatever, and then next time you go to use it, you realize it's gone. So, if it we're me, I would probably end up just picking up a couple of these, you know, just to have on hand in case a situation like that does occur. And, you know, it's just one of those things where you'd rather have it and not need it than the other way around, you know, essentially. But, like I said, it's going to be a direct replacement. Really not a whole lot to this, here.

Two and a half inches long in length, and 5/16th of an inch in diameter. So, you know it's going to be a direct fit with your Demco or etrailer base plate, there. Would be kind of cool if there was a tether on it, you know, so you don't lose them or want to make it harder to lose. I guess you could fashion something up yourself, but not a big deal either way. You know, it's good to have as a backup or a replacement if you already did lose yours, and get you back on the road again.

But, with that said, that will finish up our look at the Demco replacement pins for the etrailer and Demco base plates.