Replacement Safety Pin for Curt Tow Bar with Adjustable-Width Arms

See what our Experts say about this CURT Accessories and Parts

• What are the Dimensions of the Replacement Safety Pin for Curt Tow Bars C19746
  The Curt replacement pin # C19746 has a 3/8 inch diameter and it is 4 inches long overall. The useable length is 3 inches. I made a picture showing these measurements for you.
  view full answer...
  
• Usable Pin Length of Replacement Safety Pins for Curt Tow Bar with Adjustable-Width Arms
  The useable length on the Replacement Safety Pins for Curt Tow Bar with Adjustable-Width Arms part # C19746-2 is 3" which is measured from the head of the pin to the start of the wire. I have attached a photo below.
  view full answer...
  
• Replacement 1/2 Inch Diameter Safety Pins for Curt Base Plate
  For a 1/2" diameter pin, I recommend the Replacement 1/2" Retaining Pins with Clips for Blue Ox Tow Bars - 2 Pack # BX84-0140. The largest diameter Curt pins we carry are 3/8 inch # C19746-2.
  view full answer...
• Does the Universal Bumper Brackets # C19748 Require Fabrication/Drilling on My 2015 Chevy Sonic LTZ?
  In order to mount the Universal Bumper Brackets for Curt Tow Bar with Adjustable-Width Arms # C19748 to your 2015 Chevy Sonic LTZ, it does require fabrication by way of drilling to accommodate the bolts of the brackets. If you decide to go that route, these brackets do require the Replacement Safety Pins for Curt Tow Bar with Adjustable-Width Arms # C19746-2. It is important to note the the universal bumper brackets are made specifically to be used with the Curt Tow Bar with Adjustable-Width...
  view full answer...
• Is Roadmaster Replacement Swivel Collar a Fit for the Curt Universal Bumper Brackets
  The Curt Universal Bumper Brackets # C19748 measure 2" inside the brackets so yes, the Roadmaster Replacement Swivel Collar for Falcon 2 Tow Bar # RM-9200-4 will fit between those brackets. If you don't already have the pins to secure the tow bar to the bumper brackets then you'll need part # C19746-2 as well. It is worth noting that your Falcon 2 Tow Bar # RM-520 already has these swivel collars installed. All you have to do is disconnect them from the quick-disconnect adapter and you...
  view full answer...
• Do Base Plates For 2012 Jeep Liberty Mount to Curt Tow Bar C19745
  So for your 2012 Jeep Liberty, there aren't any base plates that are going to mount to the arms of the Curt Tow Bar with Adjustable-Width Arms # C19745. To continue using that tow bar you would need the brackets it is designed to attach to, which are the Universal Bumper Brackets for Curt Tow Bar with Adjustable-Width Arms # C19748. Along with the # C19748 brackets, you will also need the accompanying safety pins if you don't have them, the Safety Pins for Curt Tow Bar with Adjustable-Width...
  view full answer...

Do you have a question about this Accessories and Part?