Replacement Vent Cover for a Mirage Cargo Trailer

Question

Question:

I have a mirage cargo and I want to replace my lid and I thing is the one with the clip. My question is where I can get one. II am in Canada and the number on the lid is: AS-13 M-VDO449-A ANS Z26.-1 DOT 536

asked by: Venance L

0

Expert Reply:

If your existing roof vent has this stamped on it AS-13 M-VDO449 and has a the same connection style as the Ventline Replacement Dome Assembly # BVD0449-A01 product that you mentioned then this vent will fit your trailer.

I was able to pull one that we had in-stock and have included a photo of the numbers that are stamped on the the vent itself so that you can compare this to your vent. If this is the vent that you need it is available in both white ( # BVD0449-A01) and smoke (# BVD0449-A03).

We do ship to Canada. Check out our shipping page that I attached for more information.

expert reply by: Jameson C

0

click to enlarge

Answer 1

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out…

view full answer...

Answer 2

Are there any visible signs of wear on the magnets like exposed windings then that would indicate they need replacing. Magnets can go bad without showing visible signs of wear though. To see how to troubleshoot them check out the help article I…

view full answer...

Answer 3

Hey Linda, Yep, it sure will; the WeatherTech Roll Up SunShade Kit #WT87QV will indeed fit your 2024 Nexus Viper 27V. This is a good choice as it is double-sided with one reflective side to keep the sun (and heat!) out of your motorhome, with the…

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

Hey Dave, the wiring that comes with the etrailer RV Solar Panel Kit part #e59FV is 7.5 meters long. I attached a diagram that shows how multiple panels attach to the controller. This is compatible with lithium batteries too. Is this first time with…

view full answer...

Answer 6

Hi there Mike! Yes, you can technically replace the Coleman Max Q AC in your 2024 Alliance 26RD with a MaxxFan, but there are a few things to keep in mind. The MaxxFan part #MA00-04500K will fit in the same 14" x 14" roof opening, which is…

view full answer...

Answer 7

Most roof vents follow the standard size opening. That size is 14-1/4 inches by 14x1/4 inches but it is most commonly referred to as 14 x14. Many different vents on the inside and outside flanges can have different measurements to gain a certain look…

view full answer...

Answer 8

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 9

I believe instead of fix you meant fit, and yes, the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 willf it over a 12" x 12" roof vent.

view full answer...

Answer 10

There is; all you need is the following mounting kit and you can tilt the solar panels of the 570 watt Go Power Overlander Solar Charging System #GP99MR: - Adjustable Mount Kit #34244034 This will let you tilt the solar panels up to 75 degrees so…

view full answer...

Answer 11

Hello Blake, thanks for reaching out. I did some digging and I was able to find a reference for the 92655 hub. This uses the 15123 inner bearing and 25580 outer bearing. It will be a 12" drum as well. This reference didn't tell me the bolt…

view full answer...

Replacement Vent Cover for a Mirage Cargo Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching