Looking For Replacement Brake And Hubs For Trailer With 92655 Hubs
Updated 03/18/2025 | Published 03/04/2025
Products Featured in This Question
Question:
Im looking for the correct electric brakes and drums for my trailer. The drum is a tru ryde with number 151229 and 92655
asked by: Blake S
Expert Reply:
Hello Blake, thanks for reaching out. I did some digging and I was able to find a reference for the 92655 hub. This uses the 15123 inner bearing and 25580 outer bearing. It will be a 12" drum as well. This reference didn't tell me the bolt pattern but it should be the 6 on 5-1/2". If this is your bolt pattern, here are the recommended hubs and brakes:
- Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K
- etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer bearings races seals caps
- Search Results: dexter trailer hubs and drums
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: 25580 / 02475 trailer hubs and drums
- Search Results: bearing 25580 trailer bearings races seals caps
- Search Results: trailer brakes magnet
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Replacement Idler Hub Bearing Kit for an 82655 Trailer Hub
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Lippert Trailer Idler Hub Assembly for 4,400-lb Axles - 6 on 5-1/2" - Pre-Greased
- Video: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal Review
- Video: Checking Out the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles
- Q&A: Can 7k Trailer Brake Assemblies be Used in 6k Trailer Axle Hub/Drums
- Q&A: Are the Bearings and Seal for the Dexter Trailer Idler Hub Dexter Brand
- Q&A: Replacement Bearings & Grease Seal For 92655 AL-KO Hub & Drum
- Search Results: lexan
- Video: etrailer Easy Grease Trailer Hub and Drum Assembly Installation - 2019 Grand Design Reflection 150 F
- Q&A: Replacement Hubs and Trailer Brakes For Dexter 7000lb Axle On New Big Tex Dump Trailer
- Q&A: Replacement For 12 x 2 Dexter Electric Trailer Brakes
- Q&A: Replacement for PEER Grease Seal POS2253337TBN
- Video: An In-Depth Look at the Dexter Zinc-Plated Brake Actuator w/ Drop
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: In-Depth Review of the B and W Anti-Rattle Clamp for 2-1/2" Hitch Receivers
- Video: In-Depth Review of the Dexter Trailer Hub and Drum Assembly
- Shop: Catalytic Converters
Blake
3/17/2025
These drums worked perfect. Thank you.