Picking Out Roof Vent Lid for 2017 Heartland Wilderness

Question

Question:

Here is a shot of the hinge and the I'd label inside.

asked by: Russel M

0

Expert Reply:

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out and compare to the vent assembly on your trailer we can determine what you need and from there determine the install.

I also attached a link to a page that has all of the vent lids we offer as well.

expert reply by: Jameson C

0

click to enlarge

Russel M.

5/30/2019

Here is a shot of the hinge and the I'd label inside.

Reply

Jameson C.

5/30/2019

Thanks for that! From the pics and part numbers I can see you have the Ventline E-Z Lift Ventadome # V3094-601-00 so for a replacement white lid you'd want part # BVE0108-00 or for smoke part # BVD0449-A03.

Reply

Answer 1

Yes. If you've got a Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved #V3094-603-00C, which is the same as the V3094 you mentioned, then the Replacement 12V DC Motor for Ventline, Ventadome, and…

view full answer...

Answer 2

Angela, yes the Advent Air Low Profile RV Air Conditioner #ADV29FR you mention will work great as a replacement for your Dometic Duo Therm. This unit is compatible with your current air distribution box and thermostat so nothing else will be needed…

view full answer...

Answer 3

The MaxxFan Roof Vent part #MA00A04301K is listed as a 14"x14" opening but it will fit the standard 14 1/4” X 14 1/4” opening that you have. A lot of our customers use this fan in the standard 14 1/4” X 14 1/4” opening so you won't have…

view full answer...

Answer 4

The hardware it's referring to are the four bolts that clamp the rooftop condenser unit to the air distribution box inside the trailer. We usually just reuse the bolts from the previous unit during the installation of the new unit #ADV56FR.…

view full answer...

Answer 5

Since you are using shore power, you can replace your Coleman with an Advent 15,000 Btu unit and just need the wiring adapter. I really like the low profile units so I recommend going that route, and you can choose from either White or Black in…

view full answer...

Answer 6

The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White Item #MA00-07000K has a brush motor. The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White #MA00A04301K however does have a brushless motor.…

view full answer...

Answer 7

We do offer a replacement shroud for your Coleman Mach 3 model 7333B8876 air conditioner; with the correct replacement being from MaxxAir: - MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP #MA8335A5261 This unit is designed for…

view full answer...

Answer 8

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…

view full answer...

Answer 9

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 10

The MaxxAir Mini Trailer Roof Vent #MA00-03700 that you referenced is made out of a durable plastic that actually does a really good job against the sun. If you wanted a total metal vent then you could use the Ventline Ventadome Trailer Roof Vent…

view full answer...

Picking Out Roof Vent Lid for 2017 Heartland Wilderness

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching