Front Hitch that Fits 2022 Ram 2500 Power Wagon

Question

Question:

Was wondering if you have a front hitch for a 2022 Ram 2500 power wagon with the winch in the front bumper. If helpful, the truck is also lifted 2.

asked by: Neal B

0

Expert Reply:

Hey Neal, we have confirmed with Curt in the past that the front hitch part # C73ZV is confirmed to fit your 2022 Ram 2500 Power Wagon. What are you planning on putting in the front hitch?

expert reply by: Jameson C

0

Neal B.

1/22/2025

A fishing rod rack for surf fishing. Usually no more than 125 to 150 lbs of weight.

Reply

Jameson C.

1/22/2025

@NealB oh nice! We don't have any hitch mounted options for that currently but sounds like you have one already in mind.

Reply

Neal B.

2/7/2025

@JamesonC I was getting ready to order the hitch you recommended, but crawled under truck and I dont believe it will fit with a factory winch. Any thoughts? The hitch you suggested calls for 3 bolts on each side. Can the hitch be trimmed and just use two bolts each side for no more than 200 lbs total weight?

Reply

Jameson C.

2/9/2025

@NealB Is it possible you didn't notice the third bolt hole? I know that sounds silly maybe but for different hitch fits I've had people say something similar and it turned out they were thinking the hitch installed further back and there was only access to two of the holes. In reality the hitch installed on a different part of the frame and they just hadn't noticed the additional hole.

Reply

Answer 1

We actually have two options available for front mount hitches on your 2020 Ram 2500 Diesel. First is the Curt #C31089. This is assembled in America, has 9,000 pounds of line pull capacity and 500 pounds of vertical load capacity. Next is the…

view full answer...

Answer 2

We do have a front hitch available for your 2024 Ram 2500. That is the Curt Front Mount Trailer Hitch Receiver #C73ZV. This hitch features a 9,000 lb line pull and vertical load of 500 lbs. It also has a bolt-on installation. However, trimming of the…

view full answer...

Answer 3

For your 2022 Ram 2500 I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31089. This hitch has a 9,000lb Line Pull capacity, 500lb Vertical load capacity, and a Gross trailer weight capacity of 5,000lbs. The receiver…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Chris, Our Fitguide can be a bit confusing sometimes. Essentially the whole category is broken down into whether they fit diesel or non-diesel models. Since the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR fits both gas and diesel…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hello Douglas, I see the brackets I believe you are referring to (please see picture I attached where I highlighted the brackets) and we do have those as a replacement part. You will want the Replacement Hanger Block for Solera Awnbrella RV Awning…

view full answer...

Answer 9

Hey Eddie, thanks for the pictures. From seeing that I can tell you have a 3,500 lb axle and the correct replacement hub would be the part #AKIHUB-545-35-G-EZ-K that you referenced which comes with new bearings and seal.

view full answer...

Answer 10

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

view full answer...

Answer 11

Hey Vernon, thanks for reaching out and providing all of the details! It sounds like you have the 10K Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 which will work just fine with the B&W Continuum #BW28FR.…

view full answer...

Answer 12

Hello Jason, Congrats on the new ride! What is your new favorite feature? The Air Lift LoadLifter 5000 kit for your 2025 Tacoma is made to support heavy loads and towing by adding extra cushion between the frame and axle. When you’re driving normally…

view full answer...

Front Hitch that Fits 2022 Ram 2500 Power Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching