Looking For New Axle, Hubs And Leaf Springs For A Northeast Brand Trailer
Question:
I have a Northeast brand trailer and I would like to replace the axle, leaf springs and hubs. I took measurements using your videos as guidance but I need some help putting a package together. I can send measurements and some photos if there is a contact to reach . Thank You
asked by: Nate P
Expert Reply:
Hey Nate, I can definitely help and point you in the right direction.
For the axle, I will need to know the weight capacity, hub face (HF) length and spring center (SC) length. There should be a tag or sticker on the axle that has this info, unless it is a really old axle in which case you will have to measure.
For the hubs, knowing what axle you are going with will determine the correct hubs. I just need to know your hub bolt pattern so we can be sure the hubs will work with your wheels.
For the leaf springs, you will need to measure. Jack up one side of the trailer so you can measure the spring when not under a load. Leaf springs are measured from center-eye to center-eye. It is very important that the new springs are identical in size to the old ones.
Drop all this info in the comments below when you have it and I am happy to help guide you to the right parts.
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 38-1/2 Inch Spring Center
- 49 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Q&A: Width of CE Smith Trailer Axle Beam With Hubs CES84XR
- Search Results: 5 on 4~1/2 inch trailer tires and wheels
- Shop: Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset - 5 on 4-1/2 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: What to Know About the Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset
- Video: Let’s Check Out the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel
- Q&A: Speed Rating for the Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel # AM3H240
- Q&A: What is the Wheel Backspacing of the Kenda Tire with 8 inch Galvanized Wheel # AM3H240
- Q&A: Do You Have a Replacement Wheel Hub For a Discontinued Harbor Freight Boat Trailer?
- Q&A: Recommended 10 Inch Wheel and Tire for Fishing Boat Trailer with 5 on 4-1/2 Inch Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Options For Adding Regular 5 On 4-1/2" Hubs To A 1950s Boat Trailer
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Q&A: How to Find Replacement Axle for a 1988 NuWay Folding Trailer
- Video: A Closer Look at the Trailer Axle with Idler Hubs
- Video: Breaking Down the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Search Results: timbren vehicle suspension
- Search Results: boat trailer axel
- Search Results: boat trailer parts
- Search Results: trailer leaf springs
- Search Results: trailer axel
- Search Results: timbren 2000
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Suspension Parts
