Upgraded Replacement Leaf Springs for Malone Microsport Trailer

Question

Question:

Can i replace this on MicroSport kayak trailer?

asked by: Joey

0

Expert Reply:

The correct replacement leaf springs for a Malone MicroSport Trailer part # MPG460G are the 2-Leaf Slipper Springs part # e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that measure 24-5/8" long. That said, if you want to upgrade to a higher capacity, the 4-Leaf Slipper Springs part # e69SR are a fit as well.

expert reply by: Conner L

0

Answer 1

If you want to raise the flat end of a slipper spring like #e36SR you will need to use a shorter hanger. I have attached a link to all of our hangers below for your reference. You can filter it down by spring width and height to find what you're…

view full answer...

Answer 2

The closest size we have to a 25.5" slipper spring is 24-5/8". Do understand that this may be the correct size for your application since as leaf springs sag and get flatter they also get longer in length. Also the amount of leaves a spring…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 6

Hey Lee, welcome back! The etrailer 4-Leaf Double-Eye Spring #e22YR is a good choice for your 3,500 lb Dexter axles as long as the length matches your original springs. These measure 26" from eye to eye when unloaded and have a 28" flat…

view full answer...

Answer 7

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 8

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 9

Hey Joe, welcome back! Most likely the correct replacement leaf spring is the part #TRU52FR but you do need to measure the current springs you have from eye to eye without a load on the trailer to verify as we don't have a way to look up what…

view full answer...

Answer 10

Since you mentioned that you broke a leaf spring and not the axle, in order to determine which replacement leaf springs you'll need for your 2017 Keystone Bullet Premier Ultra Lite Travel Trailer you will need to measure your current springs from…

view full answer...

Answer 11

What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…

view full answer...

Answer 12

Hey Jerry, thanks for reaching out! For your single-axle, 3,500-lb boat trailer, I recommend the 25-1/4" Double-Eye Leaf Spring #TX58RJ. This is one of the most common spring lengths for a 3,500-lb axle and looks like a good match for your…

view full answer...

Upgraded Replacement Leaf Springs for Malone Microsport Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching