Result: boat trailer axel

Hey Troy, thanks for reaching out. We actually get this question fairly frequently since a lot of older trailers used "shorter" hubs compared to the current standard. I am sorry to say that we do not offer any hubs to fit this type of…

Hey Bob! The CE Smith Trailer Axle Beam with Studded Hubs #CES84XR will fit your 1988 NuWay trailer if your current axle has 49" hub face and 38-1/2" spring center dimensions (see attached photo to compare). The overall beam length is…

Hey Gary, so the holes that are on the CE Smith trailer axle part #CES84XR are currently at 38-1/2 inch on center so there would easily be enough room to put new ones at just 3/4 of an inch past where they are now but you would need to rotate the…

Hey Nate, I can definitely help and point you in the right direction. For the axle, I will need to know the weight capacity, hub face (HF) length and spring center (SC) length. There should be a tag or sticker on the axle that has this info, unless…

Hey Andrew, The CE Smith Trailer Axle Beam with Studded Hubs #CES84XR is a 1-1/2 inch square axle tube.

The correct replacement leaf springs for a Malone MicroSport Trailer part #MPG460G are the 2-Leaf Slipper Springs part #e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that…

The coupler I recommend for your boat trailer is the Demco Channel Tongue Trailer Coupler #12564, which fits a 3" wide channel tongue, has a 10,000 lb capacity and uses the eZ-Latch system to fit a 2" hitch ball. This will allow you to hook…

Your question came in blank, but judging by the pictures you submitted it looks like your hub seal is bad and you are looking to replace what you have. To pick out the correct replacement seal you will need to use your digital dial calipers to…

In order to find the correct replacement hubs for your EZ Loader boat trailer you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped…

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

We cannot move the spring seats here on our 89 inch axles like the #e95SR that you referenced and we only have options that are spaced 74 inches apart like this one. In order for you be able to use this axle you'd have to have new ones welded on…