Replacement Hub and Brakes for M101A2 Trailer
Updated 08/21/2024 | Published 08/16/2024
Products Featured in This Question
Question:
Hello, I am trying to upgrade my M101A2 trailer to electric brakes and wheels to match my 2016 and 2024 4runners. I came across this previous question, 341338, and would like to confirm that these drum and bearing assemblies are correct for an M101A2. Further, I would like to retain the parking brakes for my trailer and found the following brake assemblies: 23-113, and 23-112. Will this combination work with an M101A2? Thank you.
asked by: Hoplite
Expert Reply:
I wish I could say for sure that the # AKHD-655-6-EZ-K fits but we don't have that information. You will have to identify the bearings on your M101A2 to confirm this. The hub assembly uses the # 25580 inner bearing and # 15123 outer bearing so if that is what you have now it will fit. The # 23-113 and # 23-112 will work with this hub and drum assembly. However, you will have to confirm that you have a 5-bolt brake flange on your axle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: Hubs and Electric Brake Assemblies for M1010A2 Military Trailer
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Q&A: Parts Needed To Swap Out The Axle On A 1991 M101A2 Military Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: All About the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles
- Shop: Replacement Trailer Hub Bearing - 2585
- Shop: 12" x 2" Hydraulic Trailer Brake Shoe and Lining (One Wheel)
- Search Results: 23~112~113
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Shop: Towing Mirrors
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Shop: Timken Replacement Trailer Wheel Bearing - 02475
- Q&A: Brake Line Kit that Could be Used with Military Trailer M101-A2
- Video: Checking Out the Timken Replacement Trailer Wheel Bearing
- Video: Ultimate Overview of the DeeMaxx Brake Cable Adjuster for Mechanical Brakes
- Video: An In-Depth Look at the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: Recommendation to Add Electric Brakes to a M101A1 Military Trailer While Retaining Parking Brake
- Q&A: Solution for Replacement Hubs Using Obsolete 2585 Inner and 1380 Outer Bearing Combination
- Q&A: Free-Backing Drum Brakes for M101A2 Military Dump Trailer
- Article: Trailer Wiring Diagrams
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Video: Ultimate Overview of the Replacement Race for 2585 Bearing
- Video: What to Know About the 12" x 2" Hydraulic Trailer Brake Shoe and Lining (One Wheel)
- Video: The Low-Down on the Timken Bearing Kit, 15123/25580 Bearings, 15245/25520 Races, 413470 Seal
- Shop: Trailer Wiring
- Q&A: Converting Trailer from Surge Brakes to Electric Brakes
- Search Results: mchitch
- Search Results: hitch ezy