Differences Between 900LB and 1,300LB Fulton Single Speed Winches

Question

Question:

Could you please give me the ordering number for the Fulton single speed winch: [900 lb. capacity]? Are the operational characteristics the same as the 1300 lb. capacity

asked by: Peter F

1

Helpful Expert Reply:

Currently we only have the 900LB # F142007 with the strap. It is smaller than the 1,300LB # F142104 winch with a smaller handle length and drum size. As far as operating the winch they are very similar with a similar handle and switch being in the same position.

expert reply by: Bud M

1

Answer 1

Hey Scott, We do have a trailer winch with the 3-1/2" wide measurement you need to go with the CE Smith Bow Roller Bracket #CE31005PG. What you can use with this is the Fulton Single Speed Trailer Winch #F142102. This has an 1,100 lb capacity…

view full answer...

Answer 2

Saltwater is pretty corrosive by nature. It dry things out and causes metal to rust. Your best option would be to rinse the trailer down with fresh water as quickly as possible after removing it from the boat ramp so that you can limit the salt's…

view full answer...

Answer 3

If you are wanting to use a drill to ease operation of the winch, the Dutton-Lainson #DL11011 would be a much better choice. This winch is specifically designed so that the handle is easily removable for use with a drill. Using the shaft directly…

view full answer...

Answer 4

The only types of winches we can recommend for hoisting like what you are wanting to do are the worm gear winches like the #DL11011 that you referenced. This winch has more than enough capacity so it would fit and work well. For a similar winch that…

view full answer...

Answer 5

The instructions for the #DL11011 state, "to minimize heat build up and possible winch damage, do not exceed 600 rpm." So, although you can use a drill with the Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches #DL6456 to…

view full answer...

Answer 6

The 1.18" width on the Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 is the only size that is offered.

view full answer...

Answer 7

We offer rubber grease cap plugs like #DC-RP which fits a 1.18-inch dust cap hole; this is sold as a single piece. We also offer a set of two in the same size as part #RG04-010. These fit grease caps like #RG04-040.

view full answer...

Answer 8

When replacing a winch, or winches, on a boat trailer, I always recommend one that ratchets. This way if you every loose grip, you will not need to start all over after the boat or jet ski slides back into the water. So with that being said, the…

view full answer...

Answer 9

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

view full answer...

Answer 10

I wouldn't hesitate to add the 2-Speed Boat Trailer Winch with 20' Strap - 2,500 lbs #315-W2500D to your 3 inch wide trailer winch post. Many of the boat winch posts are not even that wide. For instance the CE Smith Winch Stand - Galvanized…

view full answer...

Answer 11

Dutton Lainson trailer winches like the #DL14125 have bolt patterns that are designed to fit the standard bolt pattern the winch mount on your boat trailer would have so this will work for you. Most of the holes are slotted on the plate of this winch…

view full answer...

Answer 12

I went out to our warehouse to take a look at the Dutton-Lainson Hand Winch - 1,100 Pounds #DL15103 referenced in your question. I was able to take the measurements you are needing and have attached an image with these dimensions labeled that you can…

view full answer...

Differences Between 900LB and 1,300LB Fulton Single Speed Winches

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching