Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
Question:
Is the single leaf spring with dual axles designed to be used with an equalizer on a boat trailer? My rear spring is broke. Also only the rear of the springs have shackles currently. This is how it has been before I bought it 2 years ago.
asked by: Chris B
Expert Reply:
I recommend any trailer with a tandem axle setup use an equalizer regardless of the amount of leaves in the spring or if it is a double eye or slipper spring design. On a system like your trailer where each axle is mounted individually and not connected one axle will carry more of its share of the weight when one axle lowers due to road angles or unlevel trailer positioning. An equalizer setup like the Tandem-Axle Trailer Hanger Kit # APT3 will allow the suspension to continue to spread out the load more evenly across both axles since it provides articulation to the suspension.
As for you mention of only the rear portion of the leaf springs having a shackle, this is normal when used on a single axle setup. The shackle allows the spring to lengthen under load when the spring flattens. Without this the suspension wouldn't compress it would eventually break under load.

Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: RV Bearing
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Q&A: Is There Any Advantage In Using a Single Leaf Spring Instead of a Stacked Leaf Spring
- Q&A: Spring Spring Hanger Spacing for Spring e46SR
- Search Results: spring shackles
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Q&A: Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
- Q&A: Will The 7,000LB Axle Work as a Replacement For a Bent 6,000LB Axle With 4" Drop and 95" Hub Face?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: ufp db~35
- Q&A: Upgrading Lights on 2000 Tracker PT175 Trailer to LED
- Q&A: Hitch Pin/Lock Needed For Demco Channel Tongue Trailer Coupler # DM15931-95
- Q&A: How to Determine Correct 4,000 lb Trailer Leaf Springs
- Search Results: 15123
- Search Results: sp~111275
- Search Results: lm67048
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Complete Breakdown of the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles
- Shop: Brake Controller
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Video: Hands-On with the Dexter Premier Disc Brake Kit