Spring Spring Hanger Spacing for Spring e46SR

Updated 03/20/2017 | Published 03/19/2017

Products Featured in This Question

1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long

(2341)

$31.04

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers

(32)

$271.17

Question:

I have part # e46SR and ap202-h238. If i start with the center hanger at its center point. What is the measurement to the center point of the other two hangers. Center to hitch and center to rear. Thanks

asked by: Mike D

Helpful Expert Reply:

The B dimension on a slipper spring is the distance that should be between the hanger and the mounting point on a slipper spring equalizer.

For example the part # e46SR that you referenced should have a distance of 24-7/8 inches between the first hanger and the equalizer mounting point.

Since equalizers can have different lengths there isn't a standard dimension with this spring.

Let's use hanger kit part # AP202-H238 as an example.

The first hanger of the hanger kit part # AP202-H238 will need to be 29-1/2 inches from the center hanger, the rear hanger will then need to be 29-7/8 inches from the rear hanger to install the Slipper Spring kit part # SP-161275