Availability Of an Aluminum Jaguar Trailer Wheel In 16 Diameter With 6 Lug Bolt Pattern

Question

Question:

Does this come in a 16inch wheel? 6 lug? Thanks

asked by: Keith

1

Helpful Expert Reply:

The closest 16" wheel we have to the 14" Aluminum Jaguar Trailer Wheel you found is the 16" Aluminum Jaguar Trailer Wheel # 274-000011. This is a 16"x6" wheel with the 6 on 5-1/2" bolt pattern you are looking for. It is in black versus the gunmetal gray of the 14" wheel you found.

expert reply by: Bud M

1

Answer 1

The diameter for the valve stem hole on the Aluminum Jaguar Trailer Wheel #274-000011 is 0.625".

view full answer...

Answer 2

5,200 lb is a really common axle size so most likely that number is either unrelated to capacity or is what the axle capacity the wheel is normally used with which a wheel like the #274-000011 would easily work as it has a capacity of 3,200 lbs. That…

view full answer...

Answer 3

To find the correct valve stem for your Lionshead Jaguar wheel you only need to measure the diameter of the hole the valve stem is coming through. It is likely that the Americana Metal, Bolt-In Valve Stem #AM20906 will work for you as it includes a…

view full answer...

Answer 4

The Westlake ST235/80R16 Radial Tire w 16" Jaguar Aluminum Wheel - 6 on 5-1/2 - LR E - Silver #LHAWSJ511S came with a silver Jaguar wheel. We have the same wheel in black that you might be interested in with the Aluminum Jaguar Trailer Wheel -…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

Hello Hope, thanks for reaching out. Yes, adding Timbrens to your 2016 F250 will definitely help reduce that sagging while you tow. Since they just bolt right on, it is a very easy way to beef up your suspension without any modifications or…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Availability Of an Aluminum Jaguar Trailer Wheel In 16 Diameter With 6 Lug Bolt Pattern

Product Page this Question was Asked From

Continue Researching