Pollak 7-Way to RV Socket LED Circuit Tester Spec Review Video

For a ball mount with a 1" shank hole similar to item #C45310 you will want the Curt Ball Mount for 2" Hitches item #D-4. This ball mount has a 3/4" rise, a 2" drop, and extends out slightly farther at 10-1/4" long.

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item #ET7WK. This includes a 7-Way connector, a…

Hey Jeffrey, so we have just what you are looking for with the Prodigy P3 part #90195. This controller has an EOH setting to allow it to be used with the type of brakes your trailer will have and is widely considered to be the best controller on the…

It sounds as if the connection you found is one that is located on the opposite side of the vehicle. If your 1998 model Explorer has the factory tow package installed the correct connector for the trailer wiring harness, #118421, is sometimes on the…

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

The Load Ranges for trailer tires basically dictate the weight capacity range of the tire. I don't know what size you have, but there would be no reason you couldn't go from a Load Range B tire up to a Load Range C. I attached a couple help…

Hey Anthony, it's pretty odd but the Curt tow bar wiring kit part #C59HR does not come with a mounting bracket for the 6-way so you would need to also go with the part #C92CR to mount it to the bottom edge of your front bumper.

The 7-way connector part #HM20048 can work for you but it depends on what type of umbilical coiled adapter you have or plan to go with. Basically Reggie with this installed you'll need to have a 7-way to 6-way round coiled adapter like the part…

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

The Pollak 7-Way to RV Socket LED Circuit Tester #PK12741 will trick your 2022 GMC Sierra 3500 into thinking a trailer is connected as it uses the electrical connection to detect a trailer.

The Curt Echo brake controller #C51180 is a fit for your 2020 Ford Ranger with a 7-way and does not require any additional components to install or function. At one point this brake controller didn't want to work with the new Rangers but Curt…

The Pollak circuit tester #PK12741 will tell you which functions are working in a 7-Way trailer connector but it doesn't tell you the location of the functions within the connector. But I can tell you that. If you are looking at the face of a…