Which MORryde Cushioned Pin Box Fits 2022 KZ Durango D311BHD

Question

Question:

Looking for the proper mor ryde RPB for a 2022 KZ Durango D311BHD

asked by: Daniel M

0

Expert Reply:

Since your 2022 KZ Durango D311BHD has a 13k GVWR and has a Lippert 1116 style pin box on it currently the correct MORryde Cushioned Pin Box fit would be the # MR77VR which is correct fit and weight capacity. This will fit great and will do a great job making your ride quality smoother.

expert reply by: Jameson C

0

Answer 1

The total weight of the Curt Q20 for GM Tow Package rail kits is 316 lbs. The only part of this hitch that's easily separable is the rail kit adapter that comes with the kit part #C16023 which weighs 79 lbs. So since you want a lighter slider kit…

view full answer...

Answer 2

A rotating pin box like the Lippert Turning Point will relocate the pivot point between the hitch and pin box 22 inches rearward, from the point where the king pin locks into the hitch jaws to the point where the pin box turret attaches to the 5th…

view full answer...

Answer 3

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

view full answer...

Answer 4

We typically recommend that any beds in the 6-1/2' to 6-3/4' range used a sliding hitch and bed shorter than that used a fixed hitch with a rotating pin box to enable enough clearance to make a full 90 degree turn. Since you have a 2022 Ram…

view full answer...

Answer 5

We typically will recommend sliding 5th wheel hitches for trucks with a bed shorter than 8 feet, unless your 5th wheel has dished-in front corners an the 5th wheel manufacturer specifically states that a sliding hitch isn't needed I'd…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 10

Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670 you're looking at are both excellent 5th wheel hitches, but I have to go with the Companion in this case simple because it is more robust and has a…

view full answer...

Answer 11

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 12

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Which MORryde Cushioned Pin Box Fits 2022 KZ Durango D311BHD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching