Installation Process On Hidden Hitch For A 2023 BMW X5 With M Sport Package

Question

Question:

I just purchased my first new vehicle, A 2023 BMW X5 and his has the M Sport Package. I want a hitch that is hidden and I was wondering what all had to be done for installation. Thanks

asked by: Travis

0

Expert Reply:

Firstly congratulations on the purchase of your new 2023 BMW X5 with M Sport Package. When it comes to installing a hidden trailer hitch onto your vehicle I would recommend The Stealth Hitch # SH25VR. After installation this trailer hitch has a completely hidden design, that will give it a clean, from-the-factory look and it will not affect the ground clearance or block your trunk's foot-access sensor.

The Stealth hitch requires no drilling for installation, but it does require temporary removal of the bumper/fascia during the installation process. You will also have to permanently remove the impact structure and the hitch will replace the structure for support and safety, and lastly the gravel shield under the rear of the car (not fascia) will require trimming.

The Stealth Hitch # SH25VR comes with all the necessities needed to towing a trailer. It also comes with the receiver attachment that is meant for bike racks and cargo racks only. To tow a trailer you will need to use the included ball mount attachment. If you only wish to haul a bike rack or a cargo rack then The Stealth Hitch # SH89VR will only come with the receiver attachment for bike rack and cargo racks only. If you ever decide that you do want to tow a trailer you can purchase The Towing Kit # SH58VR later on down the road.

I attached an installation video link of The Stealth Hitch # SH25VR being installed onto a 2022 BMW X5. The installation process will be the same for your 2023 BMW X5. If you have any further questions please feel free to reach back out to me and I can provide further assistance.

expert reply by: Noah E

0

Hidden Stealth Hitch Design On A 2023 BMW X5
(click to enlarge)

Installation Of Stealth Hitch On A 2023 BMW X5
(click to enlarge)

Answer 1

When installing The Stealth Hitch #SH89VR onto your 2023 BMW X5 there is no type of fascia or bumper trimming needed in order to install it. The bumper and fascia will remain intact, but there is a small piece that is underneath your vehicle that you…

view full answer...

Answer 2

With the Stealth hitches like the #SH25VR that fits your 2022 BMW X5 that comes with the ball mount there aren't any other options for ball mounts that would have different rises or drops. There is only the one setup that can be used and when we…

view full answer...

Answer 3

That's a good question, and there is no type of fascia or bumper trimming needed in order to install the Stealth Hitches #SH89VR or #SH25VR on your 2021 BMW X5. The bumper and fascia remains intact, though there is a small piece under the vehicle…

view full answer...

Answer 4

I do have some information for you that will be helpful, but as far as reprogramming your 2024 BMW X5, you will probably get the same answer from any installer that you contact. They can do the hitch and wiring but no reprogramming/computer stuff.…

view full answer...

Answer 5

The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #SH25VR will not require any additional programming on your 2021 BMW X5. The wiring in this harness is passive so no programming required. You will be able to switch off the parking…

view full answer...

Answer 6

Both the Stealth Hitches Hidden Rack Receiver item #SH64MR and item #SH89VR are confirmed to fit the 2020 BMW X5's with the M-package. The only difference is that Item #SH89VR fits the X5's that do not have the M-package. Other than that they…

view full answer...

Answer 7

Hey Jason, We don't have any tech notes stating that the Draw-Tite Max-Frame Trailer Hitch Receiver #76288 would interfere with the hands free liftgate feature, but even if it does just waving your foot on either side of the receiver tube should…

view full answer...

Answer 8

Hey Jason, The Curt Trailer Hitch Receiver #C85VV doesn't have a tech note stating that the Curt Trailer Hitch Receiver #C85VV would interfere with the hands free liftgate functionality, but even if it does you can just wave you foot on either…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Installation Process On Hidden Hitch For A 2023 BMW X5 With M Sport Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching