Will A Curt Trailer Hitch Interfere With Hands Free Liftgate Functionality On A 2021 BMW X5

Question

Question:

Does this trailer hitch interfere with the hands free kick-to-open liftgate feature on a 2021 BMW X5 sDrive 40i?

asked by: Jason D

0

Expert Reply:

Hey Jason,

The Curt Trailer Hitch Receiver # C85VV doesn't have a tech note stating that the Curt Trailer Hitch Receiver # C85VV would interfere with the hands free liftgate functionality, but even if it does you can just wave you foot on either side of the receiver tube to trip the sensors.

expert reply by: Kevin C

0

Answer 1

Hi Danny! The Draw-Tite #76288 and Curt #C85VV hitches for your 2022 BMW X5 are going to be pretty similar to each other. There are a few differences though, and I have those listed below: Draw-Tite #76288 Towing Capacity: 7,200 lbs Tongue Weight…

view full answer...

Answer 2

Hey Rhonda, for your 2025 BMW X5 you can use the Curt Trailer Hitch Receiver #C85VV. This trailer hitch has a 7K weight capacity, is assembled in the USA, and has a class III receiver so you can use any hitch mounted accessories like the Thule Epos…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will A Curt Trailer Hitch Interfere With Hands Free Liftgate Functionality On A 2021 BMW X5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching