What Does Trailer Jack Drop Leg Refer To

Question

Question:

Looking at weld on side winder jack for trailers. Question. Explain difference in drop leg and not a drop leg. I was thinking mistakenly? that drop leg meant the jack could be rotated to horizontal position for traveling but maybe this is not correct.

asked by: Jerry M

0

Expert Reply:

A drop leg on a trailer jack is a feature that allows you to lower an inner leg of the jack by pulling a pin, letting the inner leg slide down, and then re-pinning the inner leg at a lower height. This prevents you from having to crank the trailer jack for an extended period of time as they can sometimes move slowly. The etrailer jack part # TJP-5002S-B does not have a drop leg.

expert reply by: Jameson C

0

Answer 1

I can't tell you what the most reliable trailer jack is as we don't really have testing to support this but what I can tell you is that the Phoenix Electric Trailer Jack part #UF38-944040 has a longer warranty than any other jack on the…

view full answer...

Answer 2

I am not sure what your exact question is but the Lippert Power Gear Jack 181794 has been discontinued and there are no replacement parts available for this. Therefore, if you have an issue with yours then you will need to replace the entire jack and…

view full answer...

Answer 3

Hey Kyler, thanks for reaching out! **UPDATE IN COMMENT SECTION - JUMPER LOCATION IS DETERMINING FACTOR** The Progressive Dynamics Replacement Section #PD4655V is compatible with lithium batteries. There is a button on the board (see photo) that…

view full answer...

Answer 4

Hello Lou. On the wfco 8955pec it is a 55 amp unit, its why it has the 55 at the end of the part number. The Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 55 Amp #PD4655V, is also a 55 amp unit. Replacing the circuit…

view full answer...

Answer 5

Thanks for the pictures! To replace the converter section of your WF-8955PEC 55A power center, I recommend the Progressive Dynamics Replacement Converter for WFCO RV Power Centers item #PD4655V. This unit will fit in the same dimensions that your…

view full answer...

Answer 6

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 7

To prevent your trailer's rear axle from continuing to pop up, a great place to start is by replacing the shackle links on your trailer. When the shackle links become worn and the holes elongate and stretch, the equalizer can move and cause the…

view full answer...

Answer 8

There really is no way of knowing if you have that lower support plate without you checking on your specific trailer. It seems to be kind of hit or miss as to whether you need the Bottom Support Plate #DL22763 so you can either purchase the support…

view full answer...

Answer 9

We currently have 3 different trailer jack support plates. I have included other dimensions in the included photos except for #BDSPB50 which was not available. #DL22763 is 1/8 inch thick. #BD003135 is 1/8 inch thick. #BDSPB50 is 1/8 inch thick. The…

view full answer...

Answer 10

One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler…

view full answer...

Answer 11

The Stabilizer Jacks #TJ01RT-HD you were looking at are what I would recommend for your cargo trailer. These are simple but effective and at a great price. The support capacity per jack is 1,000 lbs which will be fine for your trailer since they…

view full answer...

Answer 12

I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long, 4-3/8"…

view full answer...

What Does Trailer Jack Drop Leg Refer To

Product Page this Question was Asked From

Continue Researching