Troubleshooting An E7 Error Code On A Furrion Tankless Water Heater

Question

Question:

without failure, water heater displays E7 fault code every other time that water is turned on. it works perfectly every other time.

asked by: Kenneth G

0

Expert Reply:

The E7 error code on a Furrion RV Tankless Water Heater # FR93FR is a solenoid valve fault. This is something you will not be able to fix on your own and will need to contact Furrion for replacement.

expert reply by: Kevin C

0

Answer 1

The Bevel Gear Kit AT75029 you are needing was discontinued when Atwood was bought out. I recommend replacing your landing gear so that replacement parts are more readily available in the future. The Lippert Electric Landing Gear Set #LC333964 has…

view full answer...

Answer 2

The Kwikee Electric RV Step Complete Assembly #LC372261 is the correct replacement steps for your LCI 128980 steps which are no longer available.

view full answer...

Answer 3

The exact step you have is the Lippert Electric Tread Lite Step for RV #LC353543. Since the motor and linkage of the step set can't be accessed from the bottom you'll have to un-bolt the steps to access the motor area and see what the issue…

view full answer...

Answer 4

The correct replacement control module for the obsolete Lippert Coach Step 128980 double retractable step kit is part #LC301702, according to the nice folks at Lippert. If you click the provided link, you can see a video product description of the…

view full answer...

Answer 5

I reached out to my contact at Lippert and he said that both the Keypad 500456 and the 500457 module are obsolete but the Replacement Components Kit #LC359259 will work perfectly to replace both components. This will get your system back up and…

view full answer...

Answer 6

Are you only installing the #LC82FR (500731)? To replace your 500210 you will need the full kit #LC359259. There are also wiring changes you will have to make at the pump assembly before it will work. After speaking with Lippert it sounds like this…

view full answer...

Answer 7

Hey Carter, thanks for reaching out! The GM trucks with the 6-1/2' bed can use a stationary hitch as long as the 5th wheel trailer has a tapered nose. For your 2025 GMC Sierra 2500 I recommend using the PullRite OEX SuperLite #PUL96ZR for a few…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Troubleshooting An E7 Error Code On A Furrion Tankless Water Heater

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching