Font And Rear Replacement Covers For Solera Awnings

Question

Question:

Looking for the back cover for: Solera Awnings LC643923 What do you recommend?

asked by: Dan C

0

Expert Reply:

The correct rear cover for your front Replacement Cover for Solera Awnings # LC643923, is the Replacement Cover for Solera Awnings # LC643921.

expert reply by: Bryce D

0

Answer 1

I may have a solution for you, but without knowing exactly what type of awning this is I cannot confirm this will work. However, we do carry 2 awning end caps for Lippert/Solera awnings that I recommend checking out and seeing if they're the same…

view full answer...

Answer 2

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

view full answer...

Answer 3

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

view full answer...

Answer 4

The Replacement Cover for Solera Awnings part #LC643923 is for the idler head side. If you need the drive head side then the matching one for this is the Replacement Cover for Solera Awnings part #LC643922.

view full answer...

Answer 5

The Replacement Cover for Solera Awnings #LC643923 fits a Solera Awning idler head. There would also be a drive head. You can use the drive head and other parts of the awning to try and determine what awning that you have. If you are unsure, you can…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Gary, yes, we do have a base plate for your 2025 Ford Ranger! What you'll want is the Roadmaster Direct-Connect Base Plate Kit #RM23DQ. This base plate has removable arms, has hidden brackets for a non-obtrusive design, and has a simple…

view full answer...

Answer 12

Hey Ron, good to hear from you! How long are your current U-Bolts? The U-Bolt Kit #APUBR-8 could potentially work as it has 7" long U-Bolts, but it really boils down to what you currently have. For something longer we have the MORryde U-Bolt Kit…

view full answer...

Font And Rear Replacement Covers For Solera Awnings

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching