Wiring Diagram for Superwinch LT4000 ATV Winch

Question

Question:

I purchased an Lt4000 ATV winch with a remote control switch. Can I download the wuring diagram for both?

asked by: Patrick G

0

Expert Reply:

I'd be more than happy to help you out! Attached is a wiring diagram for the Superwinch LT4000 ATV Winch # SW1140220. We don't have the instructions available as a download, but when I reached out to my contact at Superwinch they were able to provide me with the image I mentioned.

expert reply by: Jon G

0

Wiring Diagram for Superwinch LT4000 ATV Winch
(click to enlarge)

Answer 1

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 2

The HappiJac Rear Tie-Down - Qty 1 item #LC182866 will fit your 2017 Ford F-250's stock bumper but you will have to drill a hole in it. I have linked a review video below. A way better option to secure an in bed camper is to use the TorkLift…

view full answer...

Answer 3

In regards to HappiJac Truck-Mounted Camper Tie-Downs like part #LC182908-182928, the front tie-down installs inside the bed on the front panel directly behind the cab. The rear tie-down then mounts to the bumper. They will not require removal of the…

view full answer...

Answer 4

I attached a diagram that shows how the Superwinch part #SW1130220 gets wired up. In it you can see which terminal you would need to run the black and red wires. Is the battery you are using fully charged? What you described is typically the sound of…

view full answer...

Answer 5

I was able to find a wiring diagram for the Superwinch ATV A3500 winch that you have. I also attached a link to the install instructions for this winch in a separate email.

view full answer...

Answer 6

For starters, the correct replacement switch for the Superwinch LT2000 ATV Winch 1120210 is the Replacement Rocker Switch part #SW2320200. I have attached a wiring diagram of the correct switch for you below as well as the text from the manual. Route…

view full answer...

Answer 7

The replacement rocker switch for the Superwinch Terra Series ATV Winch part #SW1145220 is the Replacement Controller for Superwinch Terra Series ATV Winch part #SW87-42609. I have attached the wiring diagram of this rocker switch for you as well.

view full answer...

Answer 8

For the Superwinch LT2000 ATV Winch #1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on. If you are talking about the hand held remote…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

view full answer...

Wiring Diagram for Superwinch LT4000 ATV Winch

Product Page this Question was Asked From

Continue Researching