Recommended Replacement Axle for Harbor Freight Folding Trailer 62671
Question:
Hello - I have a Harbor Freight 4X8 folding/tilt trailer model 62671. Id like to replace the axle and leafsprings. Hub-face-to-hub-face length is 56 inches and spring-center-to-spring-center length is 47 inches. Id also like the axle hub to have 5 on 4-1/2 Bolt Pattern. What size should I order? Thanks
asked by: John J
Expert Reply:
While there are stock axles that are close to the measurements you mentioned, there is not one that's an exact match to the existing axle on your Harbor Freight trailer; in order to get an exact match you'll need to special order a replacement from a local axle dealer.
With that said, if you wanted to do some welding, the CE Smith Trailer Axle w/ Idler Hubs - EZ Lube Spindles - 5 on 4-1/2 - 57-1/2" Long - 1.8K # CE33201GA-HUB could be made to work if you remove and re-tack the spring seats. You could make that adjustment to get this axle to fit your trailer and it comes with 5 on 4-1/2 bolt pattern hubs, like you're seeking.
The only other alternative would be an axle-less suspension system like the Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs # A20RS545, which replace the need for a traditional axle and are a common solution I recommend to odd length trailer axles. This system will also replace your leaf springs and comes with 5 on 4-1/2" hubs, so it's going to give you everything you want in one package.
If you need to replace your leaf springs you will need to measure from the eye bolt hole on one end to the eye bolt hole, then choose the closest length that matches your trailer's capacity and mounting method; often times leaf springs will stretch out over time, so your worn springs will likely be longer than your replacement springs. I've linked our entire selection of leaf springs for you to check out if you decide to go the traditional axle route.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Spring Center
- 57-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Galvanized Spoke Wheel - 5 on 4-1/2
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: What PSI Should Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel be Inflated to
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Search Results: trailer axles
- Article: Trailer Tire Sizing
- Search Results: trailer boxes
- Search Results: trailer jack
- Search Results: storage boxes
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Q&A: Best Way to Reduce Sway & Stabilize Travel Trailer Already Using Weight Distribution Hitch
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Why Can't CE Smith Trailer Axle CE33201GA-HUB be Used with 12 inch Wheel
- Search Results: trailer fenders
- Shop: Trailer Hitch
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Review
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Video: A Closer Look at the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel
- Video: All You Need to Know About the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel
- Shop: Trailer Wiring
- Shop: RV Bearing
- Search Results: axle
on Trailer Suspension Parts
