Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
Updated 09/15/2020 | Published 09/11/2020
Products Featured in This Question
Question:
Will this axel fit my 4x8foot harbor freight trailer?
asked by: Joseph
Expert Reply:
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you will have a perfect fit. You will want to note that the hub face to hub face will be 60 inches.
If those dimensions are not a fit, then you may want to consider using the CE Smith Trailer Axle w/ Idler Hubs - EZ Lube Spindles - 5 on 4-1/2 - 57-1/2" Long - 1.8K # CE33201GA-HUB which have spring centers at 46-1/2 inches on center.
Your trailer carrying capacity will depend on all the components and not only the axle, so the weakest component weight rating will be your maximum trailer weight.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Search Results: wiring
- Search Results: trailer wiring
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: bearing buddy 1980
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer leaf springs
- Shop: Taskmaster Steel Modular Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - White
- Video: All About the Dexter Idler Trailer Axle w/ Hubs
- Q&A: Idler Hub With 4 Lug Bolt Pattern For a Harbor Freight Trailer With 25mm Spindle Shaft
- Video: Trailer Wiring Harness Installation - 2015 Chevrolet Equinox 56094
- Video: Hands-On with the CE Smith Trailer Axle w/ Idler Hubs
- Video: A Closer Look at the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel
- Video: Ultimate Overview of the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles
- Q&A: Replacement U-Bolt Plate and Bolts for 1-1/2 Square Axle
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: Replacing Suspension Hardware For Harbor Freight Single Axle Trailer With Slipper Springs
- Q&A: Replacement Leaf Springs For An Ice Shanty Trailer
- Shop: Brake Controller
- Video: In-Depth Review of the CE Smith Single Axle Trailer Fenders
- Video: An In-Depth Look at the Dexter Trailer Idler Axle w/ Hubs
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Vehicle Air Mattress
- Shop: Towing Mirrors