Lift Kit for Tandem Axle Trailer that Gives it 2 inches of Lift

Question

Question:

I have 2018 Prime Time Crusader 27rk fifth wheel. I tow it with a 2016 Dodge 2500 Cummins and a pull rite auto slide hitch. When hooked up I ride nose high with an 8 inch bed clearance. Can this unit be installed to lift the trailer?

asked by: Frederick K

1

Helpful Expert Reply:

We have tandem axle trailer lift kits like the part # RR23QX which will give you additional height of 2 inches but the Timbren Silent Ride you mentioned was not designed for adding height to the trailer. Since your Pullrite trailer hitch is not height adjustable you might see if you can install your pin box into a different set of holes on the trailer frame to change it's height.

expert reply by: Jameson C

1

Answer 1

Actually, it is recommended to make the very first brake adjustment manually on self-adjusting trailer brakes such as #AKEBRK-35-SA. This is so the brakes are ready to go without having to wait for them to adjust out while you drive (forward or…

view full answer...

Answer 2

The tandem axle lift kit part #RR23QX that you referenced will raise your suspension height 2 inches but looking at your trailer it looks like the leaf springs are pretty flat and in need of replacing. That will give you some additional height as…

view full answer...

Answer 3

We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit…

view full answer...

Answer 4

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

view full answer...

Answer 8

If you install the Correct Track Trailer Alignment and Lift Kit #RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

Hey Scott, I have a great option for a lift kit for your 2012 Puma fifth wheel with the Correct Track Lift Kit part #RR55QX. With this setup it will give you the ability to have either a 1-1/4 inch or 2-1/4 inch lift. I know it says triple axle in…

view full answer...

Answer 11

There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…

view full answer...

Lift Kit for Tandem Axle Trailer that Gives it 2 inches of Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching