Replacement Grease Seals for Part # 22333TC and Brakes for a 2002 Airstream Safari Trailer
Updated 08/04/2020 | Published 03/19/2013
Products Featured in This Question
Question:
I have a 2002 airstream 27 ft safari with 023-105 and 023-106 12 inch brake assembly on the trailer axle. What grease seal do I use. The grease seal on the hub has pn 22333TC on it and made in China with TCM on the seal. I plan to replace the brake assy and grease seals. Thanks
asked by: Ray B
Helpful Expert Reply:
The correct replacement grease seals for your # 22333TC seals is part # RG06-070. This includes two double lip seals and they have the same inner diameter, outer diameter and thickness as your current seals.
To replace your brake assemblies on your 2002 Airstream trailer you can use the Dexter Electric Brake Assemblies, # 23-105 for left hand and # 23-106 for right hand.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Search Results: retainer clips
- Search Results: 25590
- Search Results: trailer shoes
- Search Results: k08~201~4g
- Search Results: ez lube caps
- Shop: Grease Seals 10-36 (pair)
- Search Results: safety chains
- Shop: P&F Products Uneven Angle Trim for Enclosed Trailers - 1/2" Wide - Aluminum
- Search Results: morryde
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Q&A: Bearing Kit for Dexter Trailer Axle D52
- Q&A: Bearing Kit for Dexter D52 with Bearings 14125A/25580 and Seal with ID of 2.250 inch
- Article: Double-Eye Trailer Suspension System Review
- Video: What to Know About the Angle Trim for Enclosed Trailer
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Replacement Grease Seal for 22333 KBN
- Video: Kodiak Disc Brake Caliper Review
- Q&A: Recommended Replacement Disc Brake Kit For a 2005 Ez Loader Boat Trailer With Tandem 4,600LB Axles
- Video: The Low-Down on the Timken Bearing Kit, 15123/25580 Bearings, 15245/25520 Races, 413470 Seal
- Video: Breaking Down the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Article: Trailer Tire Sizing
- Video: Review of the CE Smith Single Axle Trailer Fender
- Video: Turn Rough Roads Into Smooth Rides – MORryde Shows Off Their Suspension Upgrades
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Solution for Replacement Brake Pads for TDE 46304 Caliper
- Q&A: Does Dexter Nev-R-Lube Bearing Installation Require Using A Press
Ken C.
7/27/2020
I have these grease seals installed on my 2009 aluminum Venture trailer, used for towing a boat. My seals are TCM 22333TC, but they actually appear to be rubberized on the outside where they would be exposed to salt water. All of the seals I see on the etrailer website are bare metal. Do you carry seals the are rated for the marine environment?