Turning Square Trailer Axle Upside Down for Extended Life On Previously Overloaded Axle
Question:
My single axle trailer used to be overloaded resulting in excessive tire wear on inside. Can I turn axle upside down to counter this problem. Its a box channel axle Thanks
asked by: Gerrit
Helpful Expert Reply:
Flipping your axle will help with the upward bend to assist in support and reducing uneven wear on tires. The natural bow in an axle is designed to be slightly upward so under load it will even to level at most. To flip your axle you may need to drill a hole for the springs to fit properly but because your axle is already under the leaf springs, the hole may already exist.
Because of your square axle, no other components will be needed unless the plate is welded in place. If that is the case you will need to remove it and add a new plate like # TRTP200175 for example. If you find that your tire wear does not get better, replacing your axle may be required.
Products Referenced in This Question
U-Bolt Plate - 2" Wide, Square Trailer Axle - 1-3/4" Wide Spring - 9/16" Bolts
- Trailer Suspension Parts
- U-Bolt Plates
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 9/16 Inch Diameter
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Video: Universal Group 3-Leaf Double-Eye Spring Installation
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Article: How to Raise Your Travel Trailer Height
- Q&A: Trailer Wheel Seems Stiff, Not as Easy to Turn After Repacking Bearings with Grease
- Search Results: bearings
- Search Results: bearing seal puller
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Q&A: How Tight Should Shackle Straps and Bolts Be Tightened On Trailer
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Video: Feature Breakdown: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer leaf springs
- Article: Trailer Wiring Diagrams
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Search Results: trailer suspension parts
- Q&A: Can 4k Axle Trailer Leaf Springs be Installed on 2019 Jayco Jayflight 267BHSW
- Search Results: trailer tires and wheels
- Article: Most Popular Wheel Bearings
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
on Trailer Suspension Parts
