Replacement Dome Lid for Ventline Roof Vent With Part VD0434

Question

Question:

Hello! I am looking for a replacement dome for the vent on my enclosed cargo trailer. it appears to be a wedge shape. The only number on the inside of the trailer on the Ventline is VD0434. Is your standard 14inch wedge shaped dome the one that fits? if not? Please help Thanks

asked by: Thomas

0

Expert Reply:

The part number you have found on the screen (VD0434) is for the actual screen not the vent model number per se. That said, this screen is for the Ventline Ventadome Trailer Roof Vents so if this is what you have then you can use the Replacement Dome for Ventline Ventadome Trailer Roof Vent part # BVD0449-A01.

The model number for the vent assembly can be found under the screen.

expert reply by: Conner L

0

Answer 1

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 2

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Answer 5

Yes, there is Joe! We've got two options for a slide topper that fits a 82-1/2" slide out. They are the Solera RV Slide-Out Awning item #LCV000165062 in black or white item #LCV000163287. Please note you'll want to make sure you have…

view full answer...

Answer 6

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 7

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out…

view full answer...

Replacement Dome Lid for Ventline Roof Vent With Part VD0434

Product Page this Question was Asked From

Continue Researching