Recommended Slide Topper for a 82-1/2" Slide Out

Question

Question:

I need to replacee my slide awing, I measured the width of the slide from the edge of the T-mouldings and is 82.5. Is there a fit for this? 83 or 85. Thank you.

asked by: Joe D

0

Expert Reply:

Yes, there is Joe! We've got two options for a slide topper that fits a 82-1/2" slide out. They are the Solera RV Slide-Out Awning item # LCV000165062 in black or white item # LCV000163287.

Please note you'll want to make sure you have 7" of clearance on both sides to prevent the topper arms from being damaged. If you have less space on each side of the slide outs then let me know and we can drop down a size so that the rollers don't come into contact with anything.

I have linked an installation video below that will show you how to get these installed.

expert reply by: Jerred H

0

Joe D.

11/22/2024

Thank you for your reply. I will remeasure based on your comments.

Jerred H.

11/22/2024

@JoeD You're welcome! Let me know if you have any additional questions.

Answer 1

It sounds like you've got the Replacement Step, Motor, and Control for Kwikee RV Electric Steps - Platinum Series #LC372558-which corresponds to the part number you provided - 9010000220. The replacement motor for this Kwikee step is listed below…

view full answer...

Answer 2

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

view full answer...

Answer 3

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 4

You measure from the outside edge of the flange to the outside edge of the opposite flange. The Solera RV Slide-Out Awning - 12'7" Wide - 48" Projection - Black #LCV000165061 you asked from fits a flange to flange measurement of 146 to…

view full answer...

Answer 5

For your 7' slide-out you should be able to use the Black Awning #LCV000165062 which fits 80" - 85" slide-outs and an awning rail that is 85" wide. Then for your 15' awning it can be a little tricky because there isn't a…

view full answer...

Answer 6

Hey Dennis welcome back! The Adco Tyre Gard RV Tire Cover item #290-3922 fits 30" - 32" diameter tires. Your ST215/75R17.5 tires measure 30.2" diameter so this cover will fit perfectly so long as you have a 6" or less gap between…

view full answer...

Answer 7

Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber…

view full answer...

Answer 8

Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part #LC168956 is the motor itself, part #LC295380. In my searching It looks…

view full answer...

Answer 9

Hey Kevin, since we know your flange to flange dimension is 79 inches the correct Solera slide topper in white would be the part #LCV000163285 that you referenced. This comes with everything you would need to install!

view full answer...

Answer 10

Hey Matt! I spoke with my contact at Lippert and they're needing some photos of the motor, including any and all data tags on the motor itself. They aren't able to find anything with the part number 080300994 that you sent me. You can send…

view full answer...

Answer 11

Thanks for all that info and I can tell you exactly what awning slide toppers you need for each of the flange to flange measurements you provided. - 72-1/2 Inches: Solera RV Slide-Out Awning #LCV000163279 (White) or #LCV000165063 (Black) - 78-1/2…

view full answer...

Answer 12

Hey Mike! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is designed to work with 45000, 47000, and 48000 air conditioners. Based on those numbers I'm assuming you those are 38000 series, but the model number doesn't always…

view full answer...

Recommended Slide Topper for a 82-1/2" Slide Out

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching