How to Wire Single-Panel On/Off Switch for Atwood Gas and Electric Water Heaters

Question

Question:

Need help wiring switch please

asked by: Jose H

0

Expert Reply:

I am attaching a wiring diagram for the Replacement Single-Panel On/Off Switch for Atwood Gas and Electric Water Heaters # AT91959 that you can reference.

expert reply by: Jon G

0

click to enlarge

Shannon B.

8/6/2024

I have a Atwood gas/electric water heater for a 1991 Sierra by cobra 35ft it has a single switch some one jamed the Drawers and pull all the wires off the switch. Trying to wire it back can someone help me please tks

Reply

Jon G.

8/6/2024

@ShannonB Is it any different than the single switch diagram I provided above? Atwood water heaters have been discontinued for quite a while now so finding information on these parts has become increasingly difficult. I'll need to know what Atwood heater you have and what the switch looks like if it's any different than the one above.

Reply

Answer 1

The manual for the Double-Panel On/Off Switch for Dometic Gas / Electric Combination Water Heaters - White #AT91230 lists the wire as orange but the manual for Atwood water heaters like AT94022 list the wire as red. It's referring to the wires…

view full answer...

Answer 2

The only way I can recommend you wire up the Atwood Switch part #AT91959 is by using the attached diagram which means using a 12 volt power source. I don't have a way we can recommend using a 110.

view full answer...

Answer 3

Hey there Daniel, yes the Advent Air RV Air Conditioner System - Manual - 13,500 Btu - White - R32 #ADV23SR would work just fine for your uncle's 1978 5th wheel with an older duo-therm 54615-245 ac unit. This kit comes with everything to replace…

view full answer...

Answer 4

Hey Matt, we have what you need but the part #ACM150 only comes with the top portion of the system so it would not be correct. You'd instead want the part #ADV32SR if you have a ductless system or the part #ADV92SR if you have a ducted system and…

view full answer...

Answer 5

Hello Chuck, Great question, and if you could let me know what page the Kevin video is on, I would love to take a look to see exactly what you are referencing. There has been a lot of mixed information in the past about what units the Advents can…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hello Robert, thanks for reaching out. The best option for this will be to replace your rooftop AC, controller and distribution box. Do you prefer a wall thermostat, or a distribution box with manual controls on the ceiling? We have options for both,…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

How to Wire Single-Panel On/Off Switch for Atwood Gas and Electric Water Heaters

Product Page this Question was Asked From

Continue Researching