How to Remove the Master Cylinder Assembly on a Titan Model 20 Brake Actuator
Updated 06/20/2012 | Published 06/17/2012
Products Featured in This Question
Question:
How do you replace this. Is it pressed into frame.
asked by: Kerry W
0
Expert Reply:
The master cylinder assembly on the Titan model 20 actuators, like # T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly. Remove the bolts, the brake line, and the cap and the assembly should come out.
expert reply by:
Michael H
0
click to enlarge
Product Page this Question was Asked From
Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Continue Researching
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Disc
- Video: Titan Replacement Master Cylinder Assembly Installation
- Video: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes Spec Review
- Shop: Replacement Master Cylinder for Dexter Model 10 and 20 Actuators - Disc Brakes
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Search Results: surge brake actuator brake actuator
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Video: Titan Master Cylinder Assembly Installation
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 1-1/2' Long
- Shop: Demco Hydraulic Brake Hose with Fittings - 19" Long
- Search Results: surge brake hose
- Search Results: drum brakes brake actuator
- Search Results: manual reverse lockout ball valve
- Search Results: reverse lockout solenoid
- Search Results: brakes
- Search Results: bearing sets
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Video: An In-Depth Look at the Replacement Master Cylinder Assembly for Dexter Brake Actuators
- Video: What to Know About the Dexter Hydraulic Trailer Brake Kit
- Q&A: How To Replace Shocks In Titan Model 10
- Q&A: Replacement Surge Brake Actuator Recommendation for Donzi Boat Trailer
- Q&A: Replacement Brake Shoes or Assemblies for 1999 Manning Triaxle Trailer
- Video: A Closer Look at the Dexter Hydraulic Drum Brake Kit
- Video: The Low-Down on the Replacement Damper for Model 20 Actuator
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige Trailer
- Q&A: Replacement Master Cylinder for Titan Model 20 Surg-O-Matic
- Q&A: Replacement for Gabriel Shock Model 610712
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Explore Expert Info
![Our Expert]()
on Accessories and Parts
on Accessories and Parts
