Slipper Leaf Springs, Equalizer and Wet Bolts for 2009 PJ Dump Trailer 7 x 14 14K
Question:
I think I have the correct part numbers can you verify? TREQ4541 for rear set springs SP-232275 for equalizer Also, do you have a bot kit for these? the 7/8inch center wet preferred and the two 9/16inch per side thank you
asked by: Jim
Expert Reply:
Yes, the leaf spring part # e74SR would work great on a tandem axle 14k trailer like your PJ dump trailer. The equalizer part # TREQ4541 is the correct one to use as well with this spring and trailer. For wet bolts you'd need the part # TRFA71063 for a 7/8 inch center bolt and then part # 126B2 for the 9/16 inch bolts and you'd be set.
Products Referenced in This Question
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 12 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 7/8 Inch Diameter
- 4-11/16 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Q&A: What Bronze Bushings For 8k Roadmaster Comfort Ride Leaf Spring Suspension
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Shop: RV Bearing
- Shop: Grease Seals 10-36 (pair)
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Search Results: dexter trailer brakes
- Q&A: Can Nylon Bushings Be Replaced With Bronze Bushings And Wet Bolts
- Q&A: Bronze Bushings for Double-Eye Leaf Spring
- Q&A: Does Bronze Bushing # K71-291-00 Fit Dexter 8000 lb Leaf Springs
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Q&A: Are 4-Leaf Double-Eye Springs SP210275 Compatible With Bronze Bushings?
- Video: Feature Breakdown: Wet Equalizer Bolt with Castle Nut and Grease Zerk
- Video: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer leaf springs
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer suspension parts
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Shop: Trailer Wiring
- Search Results: trailer brakes
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Suspension Parts
