How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
Updated 03/02/2020 | Published 10/13/2019
Products Featured in This Question
Question:
I have a 26 inch leafspring SP-051275 and i have the hanger kit APS4. I was researching and think 25 1/2 hanger spacing is correct but was hoping you could confirm before i weld them up. thanks
asked by: Jason
0
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Q&A: Replacement Leaf Spring for a Nitro Z-18 Boat Trailer
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Search Results: leaf spring hangers
- Search Results: trailer suspension parts
- Search Results: spring kit
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Article: Where to Position the Trailer Axle?
- Video: In-Depth Review of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs
- Search Results: dacromet trailer leaf springs
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement For 25-1/2 Inch Leaf Springs on Boat Trailer
- Q&A: Why Is Trailer Suspension Shackle Angled and Not Totally Vertical
- Search Results: trailer springs
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Search Results: hangers trailer suspension parts
- Video: Detailed Breakdown of the Dexter 2-Tang Clevis w/ 2-Position Adjustable Channel
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: 26 inch Leaf Spring Replacement for Trailer with 2,000 lb Axle
- Search Results: slipper springs ~ 1~3/4 inch trailer suspension parts
Explore Expert Info
![Our Expert]()
on Trailer Leaf Springs
on Trailer Leaf Springs
Mark P.
2/29/2020
I am not sure if I need the 4 leaf 25 in springs or the 4 leaf 26 in springs. I have the 2 square axle tubing for my 19ft boat. It is a 1999-2000 Wesco trailer. My springs are flat and everything is rusted. I recently purchased new 2square mounting bolts and the links from you guys, but still not confident in the proper spring size other than I know they are 4 leaf. The original hangers are in good shape and still mounted. The back hanger is narrower than the front which bolts directly through the spring. I need 2 new bolts for the rear hanger that just bolts through the hanger and the links. Are they shorter than the lower bolts that go through the spring and links on each side? Thank you.