What is Bolt Pattern of Dexter Trailer Hub part # 84545BX
Published 06/06/2019
Question:
Thanks for the reply, but I was not clear in my question. What I was looking for was the diameter of the boss that will hold the bearing race and the grease dust cap similar to the answer on a similar part. should be somewhere around 2 and 5/8 inch. see the referenced question below.
asked by: Marc D
Expert Reply:
Sounds like you are asking about the wheel bolt pattern of the Dexter trailer hub part # 84545BX. This has a bolt pattern of 5 on 4-1/2 inch which is the most common 5 bolt pattern for trailer wheels.
I attached a picture and link for more info on bolt patterns for you to check out as well.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wire
- Search Results: break away
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: lug nuts
- Search Results: 185x85 8 trailer tire
- Shop: Fastway Zip Coiled Trailer Breakaway Cable w/ Plunger Pin - 4' Long
- Shop: Fastway Zip Coiled Trailer Breakaway Cable - 4' Long
- Shop: Kenda Karrier ST205/75R15 Trailer Tire with Black Mod Wheel - 5 on 4-1/2
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Video: Hands-On with the BulletProof Hitches Extreme Duty Coupler Lock
- Video: A Closer Look at the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Search Results: dexter trailer hubs and drums
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Diameter of Outside Center Hub Bore for Dexter 3,500 lb Idler Hub # 84655UC1
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Video: Alpha Systems 4034 Roof Coating for RV Roofs Feature Review
- Video: The Low-Down on the Alpha Systems 1021 Self-Leveling Sealant for RVs
- Video: Detailed Breakdown of the Quick Roof Repair Tape for RV Roofs
- Q&A: Recommended Roof Coating For EPDM Roof Membranes
- Q&A: How To Apply The Alpha Systems 4034 Roof Coating To An RV Roof
- Search Results: 7 pin plug
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Search Results: ez lube 3500 axle
- Video: The Low-Down on the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Review
Marc D.
6/6/2019
Thanks for the reply, but I was not clear in my question. What I was looking for was the diameter of the boss that will hold the bearing race and the grease dust cap similar to the answer on a similar part. should be somewhere around 2 and 5/8 inch. see the referenced question below.