Diameter of Outside Center Hub Bore for Dexter 3,500 lb Idler Hub # 84655UC1
Question:
Whats the hub/bore diameter for the 6 on 5.5 hub? Dont know what my wheel bore size needs to be without knowing the diameter of the center bore of the hub. Thanks
asked by: Jared
Expert Reply:
I went out to our warehouse to measure the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 # 84655UC1 for you. It has an outside bore diameter of 3.09 inches that the center of the wheel will fit over. I've attached a photo to assist.
Most trailer wheels have a center bore of 3.19 inches, but as long as that center bore is larger it will work because trailer tires are centered on the lugs not the hub's outer bore. That center bore of the wheel is often covered with a cap like # 319EZ.
Products Referenced in This Question
Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Wheel Covers Hubcaps
- Center Wheel Caps
- Front and Rear Wheels
- 3.19 Pilot Diameter
- Steel
- Excalibur
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Video: A Closer Look at the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: axle flip
- Q&A: What is Bolt Pattern of Dexter Trailer Hub part # 84545BX
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: boat trailer hub assembly
- Search Results: 84 spindle hub
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Video: DeeMaxx Disc Brake Kit Spec Review
- Video: Demco Solenoid Kit for Brake Actuators with Reverse Lockouts Spec Review
- Search Results: boat trailer brake kit
- Q&A: How Many Threaded Ports on Demco Solenoid Kit DM5404
- Q&A: What Size Fitting Is On the Demco Hydraulic Trailer Brake Actuator DA66B
- Q&A: How Do I Convert A Blocking Type Surge Brake Solenoid To A Bypass Type Solenoid
- Q&A: Help Picking Out Replacement Hub for TDE 11033
- Shop: Suspension Enhancement
- Shop: Roof Rack
- Search Results: trailer hubs and drums
- Search Results: akihub~545~35~pg~k