Replacement Hubs Based on Tapered Spindle Measurements
Published 07/05/2018
Products Featured in This Question
Question:
I was able to get some numbers off the old bearings. I'm pretty sure I found the IDLER hub that I need on etrailers but just want to confirm. The outer bearing is LM67048. The inner bearing is 25580 and the grease seal is 203037X. The item number is: 8-213-5UC1. If this is correct, I'll get both ordered this week. Thanks!!
asked by: Jeff D
Expert Reply:
If you give me the tapered spindle measurements like in the attached photo, I can help you get the replacement hubs you need. I need the measurements at letter B where the seal sits, letter C where the inner bearing rides, and letter D where the outer bearing rides.
The only other thing I will need is bolt pattern and whether you want idler hubs, drum brakes, or disc rotors. I've attached an article to assist with bolt pattern to match your wheels.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: axle
- Search Results: lm11949 hubs
- Search Results: trailer hubs and drums
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: What Hub do You Recommend for My 2005 Karavan BW-2350-74-ST Boat Trailer?
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: drop spindle
- Q&A: Can I Replace my Leaf Spring with a Stronger One
- Q&A: Determining Correct Length Replacement Leaf Spring
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Video: Comprehensive Review: Buyers Products Trailer Hand Winch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: trailer axle
- Shop: Brake Controller
- Search Results: trailer drop axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Repair Kit for Dexter Electric Brake Assemblies Feature Review
- Video: Feature Breakdown: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Review
- Article: Most Popular Wheel Bearings
- Search Results: 1 3/8 x 1 1/4 hub
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Spindles
Jeff
7/5/2018
I was able to get some numbers off the old bearings. I'm pretty sure I found the IDLER hub that I need on etrailers but just want to confirm. The outer bearing is LM67048. The inner bearing is 25580 and the grease seal is 203037X. The item number is: 8-213-5UC1. If this is correct, I'll get both ordered this week. Thanks!!